Jump to content
SAU Community

T.v Upgrade M35

Ben Henry
 Share

Recommended Posts

BoostdR Mentor

BoostdR

Posted
Posted

joying ? By any chance

Yes it is. :). Only complaint is the radio audio quality is average. But I steam internet radio instead. That sound quality is extremely good. You also need a pac nis02 bose adaptor to get rid of the hiss.

I would get a unit with second zone video out to feed to the OEM screen with HKS OBD LINK Or Hobdrive data.

Matt

Philr32 Proficient

Philr32

Posted
Posted

Hey everyone, is there a pin out for the rear of the TV Tuner or anyone able to tell me which plug is for what? I would say the grey one is power and the RCAs are obviously Sound (picture too)? I'm gonna guess the grey, green, black and red near each other are possibly the aerial? I may be wrong on some of that but still not sure what the rest are if I am right, any help would be great.

Cheers

BoostdR Mentor

BoostdR

Posted
Posted

black coax are diversity antenna's

Red will be right audio in

White will be left audio in

The other plug on the green wire will be video

The shield / braid of both the audio wires (red & white) are connected together. The shield of the video (yellow) is on a separate pin.

This is the layout of the white socket on your tuner:

1________6

2__3__4__5

1 - audio right (red - inner conductor)
2 - audio left (white - inner conductor)
3 - audio ground (shield of both red & white above)
4.- video (yellow - inner conductor)
5 - not used
6 - video shield (yellow - outer sheild)

Philr32 Proficient

Philr32

Posted
Posted

Thanks. So the RCAs are in not out, hmmm wonder what's going in? Possibly the DVD player in the small section above the glove box? I thought the DVD player would link straight into the back of the pop up screen? Also what's the White plug above the grey power plug/cable? Anyone know how many amps it uses? I know it's 12V not sure on Amps. Thanks!

conan7772 Mentor

conan7772

Posted
Posted (edited)

dvd player is gps nav only.

the plug with the red/white av leads is aux on the factory radio and VTR on pop up screen.

you must have an aftermarket device fitted looking at those connections.

only some models came with reverse camera.

Edited by conan7772
Philr32 Proficient

Philr32

Posted
Posted

dvd player is gps nav only.

the plug with the red/white av leads is aux on the factory radio and VTR on pop up screen.

you must have an aftermarket device fitted looking at those connections.

only some models came with reverse camera.

Yea the aftermarket device is the DVD player above the glove box, someone has ripped out the factory one and installed a DVD player which works perfectly (sound and picture). When I change to TV/DVD the factory head unit automatically changed to AUX, now I'be got an aftermarket head deck and need to look at changing around some wiring/cables/plugs etc. Also looking at ditching the stock TV tuner in favour of something more modern and powerful.
Philr32 Proficient

Philr32

Posted
Posted

The signal has to be in Xanavi language.

You'll lose all the functions of the pop up display.

Unless you start from scratch: New tuner, new head unit, new lcd screen.

How is the video and sound input to the screen/stereo? RCA/s in the rear of the LCD?
conan7772 Mentor

conan7772

Posted
Posted

I want to keep all the trip computer stats/ fuel economy features etc on the factory screen.

Thought about a new head unit, quite a few people crack the fascias pulling it all out.

If you've got good sound and picture through your dvd, you're laughing.

I think the factory head unit sounds pretty clean.

My days of 4 channel amps and 10 inch subs are over.

Philr32 Proficient

Philr32

Posted
Posted

I've changed the factory head unit, working on fixing the sound from the DVD as the plug is an 8 pin mini din, which I need to convert to an aux/3.5mm headphone. Other than that the DVD is good it's an old aftermarket unit but that's fine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...