Jump to content
SAU Community

Recommended Posts

So iv disconnected my stupid factory dual stage boost controller on my r 34 and fitted a tee for now just to get a few more psi from the factory turbo before I put all my bigger stuff on , problem I'm having is its just a dog down low it feels like it's not barley making any boost and is really sluggish through the bottom end of the rev range ! Iv taken the boost solenoid off near the power steering res and taken the other part of the top of the rocker covers near the firewall and I'm running actuator to tee then straight into hot pipe off the turbo , any suggestions on how to get it running right or is this just how shit neo motors are iv owned 3 rb25's non neo prior to this and never had a problem they all rev freely and the boost is easy to tap into this thing is slow as

Link to comment
https://www.sau.com.au/forums/topic/441725-tried-boosting-my-neo-rb25/
Share on other sites

Hahaha.

Neo engines aren't shit just cos you can't figure out boost control.

Anyways, running more boost on an untuned ecu is pointless, just wait until you can afford to do things properly with a tune.

What part near the rocker cover on the firewall?

The map sensor?

There's your problem

lol....I would be re-mounting your MAP sensor..

if I were you I wouldn't even remove the stock solenoid. Cut the tubing and terminate the tubing with screws or plugs. Then install your boost tee hidden away.

That way if your engine bay ever gets looked over by the popo or RTA you look like you running standard boost with no controller…

Iv got a haltech ecu , 3076, 1000cc inj 40 mil gate all the shit off my track car waiting to go on but that's not going to happen over night , just looking for 10 psi to have a bit of fun till I deside to do all that , the only thing iv taken off are for what I thought was the dual stage let me know if I need to put any of this back on , car runs and drives fine just a slug down lowpost-76499-13970979536854_thumb.jpg these are the only things iv removed

Yeah forget about the other stuff at this stage as iv said I'm not putting that on yet , so is the boost sensor or map sensor as your calling it can I ask why It needs to be put back on ? Doesn't it only send signal to the ecu for over boosting or does it serve a larger purpose ?

Everyone here is trying to provide help…

I suggest you mount the stock solenoid back in where it was and plug it in… then joing the boost lines up like they were from factory. Then cut those lines and plumb off the ends and leave the solenoid plugged in.

Now add your boost Tee inline and see if you have fixed your issue.

Personally if I had all those good bits sitting aside you had I wouldn’t be messing and putting undue stress on your engine/turbo.. I would wait and fit all your goodies then play

Just my 2c….

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...