Jump to content
SAU Community

Anybody Work At Optus?

MUZT3K

By MUZT3K,
in Victoria

 Share

Recommended Posts

viper2002 Rising Star

viper2002

Posted
Posted

You'll be hard to find an Optus employee who will have access to do this, let alone will do it for you. What are you hoping to achieve by tracing the IP? Do you know if it's a static or dynamic IP, or if the person you're trying to trace is using a VPN?

emts Grand Master

emts

Posted
Posted

I can see where this is going.

he has traced an ip and found it an optus net block.

thats as far as you can take it publicly.

guessing this person has attacked/hacked their servers.

I used to manage this process for our company.

so if it just attacks/scans you can notify the IP's abuse address with the logs and they will generally disconnect the user.

if they have hacked you, unfortunately you will need to go through a legal chance to subpoena the details.

MUZT3K Veteran

MUZT3K

Posted
  • Author
Posted

Emts your pretty much on the ball..I'll give some brief detail.

I own a site and this person must know me in person. And is inpersonating me and writing abusive things and posting my mobile etc.his used the same I.p twice out of the 4 times posting

  • 4 weeks later...
Downforce Grand Master

Downforce

Posted
Posted

It's against the privacy act for an ISP employee to provide that information so either way you won't get far without formal legal action. If it's a serious incident then proceed, if it's just a punk impersonating you but not actually hacking in to your personal accounts or systems, then just laugh it off and move on. If the person is smart they wouldn't do anything that would get them in trouble from their own computer/network.... If all you have is an IP address - big deal. That doesn't equal the person you're looking for. I deal with attacks that come from random IP addresses and ASN's around the world and it's just not that simple to trace an IP address to an actual person. Whoever it is could be using someone elses network or computer and you wouldn't know. They could be using free wifi hotspots in the CBD. Good luck with that. But you might get lucky, some people aren't that smart.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • GTSBoy
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By GTSBoy · Posted

      That's hilariously putrid!
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...