Jump to content
SAU Community

Recommended Posts

Engine $6,800

Open to offers though

Speed sensor, pic please

Coolant reservoir cap? Ill only sell the lot together

Edited by Jezzza
Vspec II engine now $6,200 ono

Or take whats left of the car!


GTR body, some good panels. ALL glass

R34 GTR Vspec II engine, stock, unopened

Oilcatch can

Gearbox

Front diff

ORC 559 twin plate clutch

Nistune R32 GTR (R34 engine)

$8,300


Parts already removed..

Brakes and rotors

Suspension (drivers is stuffed)

Radiator

Shroud (gone)

clutch fan (gone)

Wipers

Front Reo (gone)

Brake ducts (gone)

Intercooler

All these parts with engine: $8,800

Edited by Jezzza

Price reduction and NEW parts!

New parts

- 3" min. cat back exhaust, one muffler and rear cannon, stainless steel, one dent in mid muffler - $200

- 3" cat with o2 sensor - $50

- RSR twin front pipes to suit RB26, 3" stainless steel - $300

- R32 Rear camber arms, unknown brand, look like white line - $150

- R32 GTR front diff - $400

- non-HICAS bar, unknown brand - $200

- R32 GTR OEM rear sway bar - $100

- R32 GTR OEM front sway bar - $100

- GTR fuel pump - $50

- GTR pump electronic senders and pickup - $100

Moving the BIG stuff, will be one of the last price drops as my shed is going up this month!

Wife wants to get it out of the house!.. so offer away!

- GTR bonnet - $300

- Passenger door trim - $30

- GTR Passenger seat with rail - $150

- Velo GP90 seat with rail (apparently S13) - $400

- GTR boot - $120

- GTR wing - $100

- GTR bumper with lights - $150

- GTR taillights - $40ea

- GTR rear wiper - $15

- GTR rear seats, top and bottom - $50

- GTR OEM front strut brace - $50

- Rear upper trim - $20ea

- Drivers elec switches - $50

- GTR 3 gauge cluster - $70

- Drivers door trim - $50

- Seatbelts - $40 the lot

- Rear boot lining + carpet - $30

- GTR AFM (one has broken tab) - $100 for both

- GTR headlights - $40ea

- ARC super induction box - $250

- GTR dash, and all associated trims - $70

- GTR wheel - $40

- GTR passenger mirror - $30

- Windshield cowel panel and rubber - $30

- Radiator silicone hose - $20

- Passenger elec window - $30

- Bilstein suspension, front drivers damaged - $150

If you require more pictures, please PM me with your number and part you are after

Cheers

Edited by Jezzza
  • 2 weeks later...

Still have the N1 side pods avaliable!
These are not the rear pods, they are the ones that fit along with the side skirts
Genuine Nissan, one has two small cracks, very easy fix
$300

Hey mate,

I'm interested in dashboard along with main cluster, steering wheel, front and rear swaybars if new oem and maybe few other bits.

Can you send me some pics of the dashboard if its in a good nic as I have big bubbles and holes on mine.

Also your location and contact number willing to pick up tomorrow.

Thanks

Dave

PMs replied

Dash has small bubble passenger side above glovebox, I think pictures have it shown. Will get it out tonight/weekend

Main cluster = speedo? Its a Tomei unit, $350

I have the swaybars, OEM

Locations is Perth WA but can freight

**Refer to link in first post for parts available. If its not there anymore, it would be sold.

Some parts not yet pictured are GTR gearbox, twin plate ORC 559 clutch, front diff

I also have some misc. parts like A/C, P/W, swaybars, front suspension arms/hubs

Brake (ABS) master, cylinders, clutch cylinder

All glass available, rear is demister**

Edited by Jezzza

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...