Jump to content
SAU Community

Recommended Posts

Hi All,

I have a 2005 Auto Skyline coupe with 19inchers with 245/35 profiles. My suspensions are standard and car is not lowered.

I want to have a more staunch look so that my wheels come out a bit.

I believe the spacers are the way to go.

Questions:

1) Would you recommend? What do you guys think?

2) What thickness do i go for? front and back?

3) What types are there and what are the good ones? (mid range?)

4) likely cost at a Jax or bobjane type garages?

basically like i said i am more going for wider look but not going outside legal limits. I also would get good ones for safety and dont want my wheel coming off the motorway as it is my daily drive.

hope to hear back. I would take your recommendations seriously. My wheels are due for alignment and may get the guys to install these while its there.

Thanks

JT

Different car and wheels but here's what 20mm spacers look like on an R34 GTT: http://www.skylinesaustralia.com/forums/topic/391281-wheel-spacer-size-for-r34-gtt-stockies/

Whatever you do make sure you get hub centric ones.

Completely illegal and will give your insurance company an excuse to get out of a claim. The only safe way to do it is to increase the stance by going wider rims (no wider than 30% on top of factory width) while maintaining the offset within 12.5mm of factory offset. Which keeps things totally legal

If you are going to use spacers

1 - Make sure they are hubcentric

2 - Bolt ons are the way to go

I'm not sure what the standard offset is, but maybe you could get a 15mm bolt on spacer.

No they will only cover you for legal modifications so in the result of an accident they could dismiss you're claim if they feel the spacers may have contributed to the accident.

I know lots of people run spacers but in my opinion they are just not worth it. Buy new wheels if you wont a better stance... couple of grand for wheels or the potential fines and cost of repairs on you're car and any other car involved in an accident. as said tho that's just my opinion so take it or leave it :)

From the NRMA PDS -

Maintaining your vehicle
We don’t provide cover if any of these applied to your vehicle when the
incident happened:
• your vehicle was not in good order and repair because it had :
– any unrepaired damage
– rust, mechanical or any other damage that made it unsafe to drive
• your vehicle was not in a condition that met the registration requirements
in your State or Territory.
If spacers aren't legal in your state then according to this, you won't be covered.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mount some of these on your dash? https://www.greddy.com/products/16001720  
    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
×
×
  • Create New...