Jump to content
SAU Community

Recommended Posts

Hi all first post here :merli:

Is there anyway to find out what colours they built Vspec II in?? Perhaps with Nissan Fast? I have a copy but am not very good at finding my way around it.

The reason I ask is I'm looking to import a R32 V-spec II from Japan and am really keen on TH1 Dark Blue Pearl. I know its a very rare colour, rumours of around 300 built in total, but am happy to wait till one comes along, if they exist that is, I know there are V-specs, but how about V-spec II? There is no point in me waiting for one to pop up if they were never built to start with. :ermm:

Does anyone have build numbers of paint codes or have any idea how to find out? Or seen or heard of one?

Any help would be good.

Link to comment
https://www.sau.com.au/forums/topic/442285-r32-gtr-v-spec-ii-paint-codes/
Share on other sites

Check with "Iron Chef"

Paint Codes:- Scroll down to "Cosmetic, Styling and Respray" > "Nissan Paint Codes" is Pinned at the top :)

That won't tell you if TH1 is available in VS2 tho'

Welcome to SAU Raki

Check with "Iron Chef"

Paint Codes:- Scroll down to "Cosmetic, Styling and Respray" > "Nissan Paint Codes" is Pinned at the top :)

That won't tell you if TH1 is available in VS2 tho'

Welcome to SAU Raki

Check with "Iron Chef"

Paint Codes:- Scroll down to "Cosmetic, Styling and Respray" > "Nissan Paint Codes" is Pinned at the top :)

That won't tell you if TH1 is available in VS2 tho'

Welcome to SAU Raki

Thanks Terry :). Yes its proving hard to figure out!

Hi all first post here :merli:

Is there anyway to find out what colours they built Vspec II in?? Perhaps with Nissan Fast? I have a copy but am not very good at finding my way around it.

The reason I ask is I'm looking to import a R32 V-spec II from Japan and am really keen on TH1 Dark Blue Pearl. I know its a very rare colour, rumours of around 300 built in total, but am happy to wait till one comes along, if they exist that is, I know there are V-specs, but how about V-spec II? There is no point in me waiting for one to pop up if they were never built to start with. :ermm:

Does anyone have build numbers of paint codes or have any idea how to find out? Or seen or heard of one?

Any help would be good.

Ok........ I have both the official V-Spec and V-Spec 2 Nissan brochures and you are right, TH-1 was available in V-Spec BUT NOT IN V-SPEC 2.

I'm not sure if you could order it as a special colour but it certainly is not listed as a colour option.

The attached file shows the V-Spec 1 brochure on the left and 2 on the right.

Cheers,

Bob.

post-78207-0-80634800-1398590911_thumb.jpg

Ok........ I have both the official V-Spec and V-Spec 2 Nissan brochures and you are right, TH-1 was available in V-Spec BUT NOT IN V-SPEC 2.

I'm not sure if you could order it as a special colour but it certainly is not listed as a colour option.

The attached file shows the V-Spec 1 brochure on the left and 2 on the right.

Cheers,

Bob.

Thank you Bob! :worship::worship: That is just the sort of thing I have been looking for. A little disappointing as it seems unlikely that there were any TH1 V-spec II's but its good to know so that I can make a decision as which way to go. >_<

Now, I must get me some of those brochures :thumbsup:

The problem is my scanner is only A4 size and the brochure is about 15% wider than A4.

The only thing I could do is take a photo of every page but unfortunately that takes time and I'm back to work tomorrow after a 10 day break.

My @rse won't hit the ground for the next few days.

Bob.

Ha! Guess what I've had sitting on my desktop for the last 2 months... yip that's right a PDF copy of the R32 GTR V-spec II brochure above. All this time I had the answer and didn't realise it. :whistling:

I even managed to work out where I found it.... its around 40mb and can take a little time to come through in your browser, then right click - save.

http://www.downloads.gtr.org.uk/Brochures/R32GTR%20Vspec2.pdf

Thanks for the helping me see what was in front of my face :D

Edit. There are a few handy PDF's here

http://www.downloads.gtr.org.uk/

Edited by rbnutz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...