Jump to content
SAU Community

Recommended Posts

SAU-Vic Committee and Micolour would like to welcome SAU'ers to the MAY Tech Night for our monthly meet.

post-45959-0-55271700-1399287985_thumb.jpg

Date: Wednesday 28th of May

Time: 6:30pm onward

Venue: Micolour - 7 Dissik Street Cheltenham

Come along for BBQ, catch up with some mates and a listen to a presentation by Mick about common things to look for when purchasing a car, and whatever else he choses to share with us. If you have a specific area that you want to hear please post up below so Mick can do his best to accommodate your interest.

DOOR PRIZES

This month we will be giving away 3 prizes. Each prize will be a $50 BP voucher.

All prizes donated by SAU Victoria.

No Hooning as there is CCTV in the street and the police station is only streets away

10253897_866331910059853_264919605337717

Link to comment
https://www.sau.com.au/forums/topic/442734-sau-vic-and-micolour-tech-night/
Share on other sites

  • 2 weeks later...

Hey Guys,

Just wanted to say thanks to all who came down to the shop for the tech night.

Thanks to all who took part in the organisation, setup and clean up at the end of the night.

I hope everyone who was here was able to take something away with them that will help

them on their next buy. Please feel free to drop me a line if you have any further questions.

Cheers Mick.

  • Like 1
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...