Jump to content
SAU Community

Recommended Posts

FOR SALE:

1999 R34 GTT 5 Speed manual Coupe. Rego till Nov 2014, has 90XXXkm on odometer. Pearl black GV1 + 3M DINOC Carbon fibre pattern wrapped bonnet.

I am the second owner since it was imported into Australia in 2010. I purchased this late 2012, and so have had it for 1.5 years. Absolutely love it to bits, and if you see the little details on this car you’ll understand. Always bought best parts possible. Interior is in great condition, there is some scratching on the arm rest console, but the centre console and dash is in great condition – so is trim on the doors etc. All electronics work perfectly fine. Still have original Nissan keys. No log books though. I have receipts of work done and parts bought for the car. A lot of stuff sourced from Japan directly. Never been hassled by police.

Click here for more pictures: https://www.dropbox.com/sh/iysjc4wi2yhtqmq/QAjyRucO7K

post-99360-0-29499200-1399346124_thumb.jpg

Mods:

Bilstein shocks + King springs (as recommended by many forum members), is very comfortable and a great balance between stiffness and comfort. Is also lowered (circlip adjustments)

Cusco sway bars front + rear

URAS front tie rods

URAS castor rods

Replaces HICAS tie rods with brand new OEM Nissan arms

HICAS lock bar

Whiteline bushes installed (forgot which ones but look underneath the car and you’ll see them)

Custom-made (by me) 192 LED reverse lights

Has a Blitz BOV (on car since Japan)

Blitz pod filter (stainless steel mesh) + Perspex ‘box’ handmade(by me)

Full Kakimoto exhaust ending with Kakimoto cannon (on car from Japan)

Nismo single plate coppermix clutch + flywheel + braided clutch line

Immobiliser, alarm, central locking installed from compliance (AUS standards)

Interior:

Pioneer head unit (very basic, has CD, AUX, USB/MP3) no Bluetooth – but also have a Bluetooth-enabled head unit if you want it (will replace)

Replaced steering wheel with woodgrain OEM Nissan item (from Yahoo JP, listed as coming from another R34)

GTR VSpecII metal pedals direct from Nissan

Nismo gear knob

18% Tint (actually not sure on percentage)

Bonnet gas struts (from NYTSKY’s groupbuy) – carbon fiber, look and work awesome

GARAX HID bulbs

I think there are aftermarket speakers in the car but not sure who put them in

Exterior:

3M DINOC carbon fiber wrap on bonnet (Done at an SAU event in 2013)

Nismo LMGT4s 17 x 7.5/8.5 (+35 offset each…I think) in original bronze, they do have rash from previous owner in Japan though. Put on fresh new NISMO stickers on last year.

Tyres are Nitto INVO, had them on since early 2013 and have driven less than 5000km since

Altia body kit from factory

SAU Sticker on rear quarter window (hahaha)

Nismo smoked side indicators

Things that may need attention:

Paint is fading on the top, seems to be various rainspots of fading too – I think from acid rain in Japan, because also when I had the car there was buildup on all windows which I removed with a product (still have it, forgot name now). Couple of dings on the sides from people opening doors (WHY ARE PEOPLE SO STUPID). Previous owner bumped the rear left, so there’s a chip and bit of panel gap. Gearbox chatter accelerating in 4th gear at 60-65km/h, gone after that – have a written report from JLM that it’s consistent with age of gearbox. Doesn’t affect driving at all. There are a 3 cigarette burns in the seat, either from previous owner or owner in Japan, not me as I don’t smoke (and you can tell if you sit inside the car)

------------------------------------------------

No finance on it. Always serviced on time, have changed spark plugs, oil, gearbox, diff oil, recently. Is a great car to drive, comfortable, stock power but is plenty for street driving really. Plenty of boot space. Can fit 5 people inside (has 3 seatbelts in the back). I’m looking to move onto motorbikes so am making the decision to let this go. Still has flare from Japan!!!! Note: does not come with all the trinkets/accessories in the car - and as you can see I have added a few woodgrain accessories, will remove and/or replace with stock parts upon sale.

Asking price is $16500 or Swaps + cash my way for a motorbike (must be LAMS approved), DON’T OFFER ANOTHER CAR

Small mods can be parted out (depending on item) just ask me in the thread. Not willing to part out any of the suspension bits (which are most of the proper mods anyway). If you want the car without some mods contact me and we’ll work something out.

PM or call/message 0422 eight three nine 8 8 8. Don’t waste my time.

Link to comment
https://www.sau.com.au/forums/topic/442765-fs-1999-r34-gtt-nswsydney/
Share on other sites

  • 2 weeks later...

Bump, just met another GTT owner on the weekend who also has the same nismo clutch as me. They also have the same sounds and they told me it's the nismo clutch, not the gearbox. So, that leaves the paint as the only bad point of this car.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...