Jump to content
SAU Community

Recommended Posts

Hey guys.

Can I run 264 9.00mm lift hks cams 2202 RN175 with standard valve springs. Where could I get these cams in Australia?

That's a reasonably high duration, meaning you will be revving it.

In which case you will probably want better springs.

Link to comment
https://www.sau.com.au/forums/topic/443661-rb25-hks-cams/#findComment-7294836
Share on other sites

You can run an adjustable exhaust cam gear with stock cams, which will give you an improvement in mid range power. But as a mechanic id never fit cams without putting in heavy duty valve springs. It pretty much goes hand in hand. You want cams, you must fit valve springs. Yes the HKS cams are drop in meaning they'll be ok to use with your stock valvetrain/head (excluding valve springs) The stock springs wont cope with the duration/lift of the HKS cams.

Link to comment
https://www.sau.com.au/forums/topic/443661-rb25-hks-cams/#findComment-7294859
Share on other sites

I hope you don't want to put in cams just so you can have am adjustable intake gear.....

That would be an ultimate fail, as vct is way too good to lose, and the stock gear is adjustable anyway (on a neo that is, not sure on pre neo, adjustable from the back but easily modded to be adjustable from the front.)

Why do you want cams?

What do you use the car for?

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/443661-rb25-hks-cams/#findComment-7294922
Share on other sites

i had hks cams before and i want to delete vct ro run 26 covers. I want the car to make around 550

DONT DELETE VCT.

Especially just to run 26 covers.

That's plain stupid.

People with rb26engines would kill for vct.

Link to comment
https://www.sau.com.au/forums/topic/443661-rb25-hks-cams/#findComment-7295529
Share on other sites

Yeah seems silly to get rid of it just to run different covers. You can make the 25 covers look good

Or you could probably get the 26 covers modified to have the hump for VCT put in them

The power will be alot nicer if you keep VCT

Link to comment
https://www.sau.com.au/forums/topic/443661-rb25-hks-cams/#findComment-7295539
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...