Jump to content
SAU Community

Group Buy For M35 3X52Mm Gauge Holder (Where Tv Screen Goes)

walkoau
 Share

Recommended Posts

walkoau Mentor

walkoau

Posted
Posted

Hi everyone.

I have been doing a little project at home and I have come up with a mould for a gauge holder to replace the factory TV screen and buttons.

I am offering these for $60 each +postage or pick up is welcome (from bowen mountain nsw, near north Richmond). I will only do them when I have at least 4 orders at a time.

they are made of 2mm Perspex.

and they will come to you straight from the mould. So please only hands on people should order. the reason for this is it would be very time consuming for me to trim and paint every single one and the price would be significantly dearer.

You will need to cut the 52mm holes yourself using a hole saw, you will need to trim it to the exact size, give it a coat of plastic primer and top coat of your choice and then fit it.

I used fibreglass around the seams on the back to mount it. You can also make your own tabs or use tie wire or cable ties ect to keep it in position. once gauges are mounted in it, you can use the bracket on the back of the gauges to secure it also. Again there are a number of ways you can do this, but I must stress this is not just a buy+plug+play situation. you have to be good a DIY to do this.

Don't order if Your not confident to do this yourself.

If your interested PM me and I will send you payment details when the minimum 4 orders are placed.

post-1416-0-56861200-1402039707_thumb.jpg

post-1416-0-12281900-1402039753_thumb.jpg

  • 2 weeks later...
scotty nm35 Grand Master

scotty nm35

Posted
Posted

I am interested, I just haven't had the time to contact you about it. Performance parts for these aren't going to fly off the shelf, but if you make them you will eventually get rid of them if you do small quantity runs.

Remember, these are family cars predominantly, so performance mod customers are few and far between.

Anyway, put me down for one Justin. Send me a PM with your details if you can, or do you have a Paypal account?

walkoau Mentor

walkoau

Posted
  • Author
Posted

Ok. That's 3 people now that want one. My PayPal account is [email protected]

After the 3 of you have made payment I will make and ship them. to make it easy I will do a flat rate for everyone of $10 postage Australia wide.

So $70 total including postage.

Thanks

Justin.

walkoau Mentor

walkoau

Posted
  • Author
Posted

Yeah no problem, you make number 4 and its ideal to make them in batches of 4 for me.

Once you make payment to my PayPal account, pm me your details including address and I will post as soon as they are made. Which will be my next day off work after the 4 people have paid.

Cheers

Justin

If anyone needs to contact me 0411 171 616.

  • 3 weeks later...
walkoau Mentor

walkoau

Posted
  • Author
Posted

Thanks to the people that have paid. Your gauge holders have been sent.

I do have one here with slight imperfection, will sell for a discounted price of $50. Includes postage. It will just need to have a couple of extra coats of primer filler.

walkoau Mentor

walkoau

Posted
  • Author
Posted

Yeah no probs, just wait for 3 more people to jump in and I will do them same week. I will send you pm and payment details once I get 3 more confirmed.

Will post a pic up of one straight out of the mould tomorrow.

  • 7 months later...
scotty nm35 Grand Master

scotty nm35

Posted
Posted

I still haven't gotten around to fitting mine, and probably won't be seeing I have the informeter. If Justin isn't making them anymore you could probably twist my arm to send you mine.

Try and PM him so he gets the notification.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R33 GTST Sh*tbox to Polished T*rd

      By Dose Pipe Sutututu · Posted

      I sense an out of control build thread coming up lololol. That 450kW goal will end up being 600 to 700kW LOL.
    • Duncan
      R33 GTST Sh*tbox to Polished T*rd

      By Duncan · Posted

      Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • pacman_1219
      RB25DET Neo Rebuild

      By pacman_1219 · Posted

      Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Yeetus
      R33 GTST Sh*tbox to Polished T*rd

      By Yeetus · Posted

      Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
×
×
  • Create New...