R34 Rb25Det Turbo Upgrade

[Cizzink11]

Hello.

Just wondering whats a bolt on to stock turbo upgrade for a r34 rb25det neo engine.

Sorry for my ignorance I been asking people but keep getting silly answers.

I own a patrol with a rb25det neo engine out of r34 so you can see why I wouldn't know lol.

My stock turbos got a little whine to it so I just assume its on its last legs.

[Cadmoon]

What are you wanting out of the engine and what's your budget?

[sneakey pete]

Highflow is probably the cheapest option so long as you are able to have the car off the road for a few weeks

However, bear in mind that you will also need to have the car retuned, which means ECU, and you'll probably want other supporting modifications too

[RBrennan25]

Search hypergear on google and sau. Bolt on turbos, cheap, and amazing results and second to none customer service. Ask anyone on Sau and they will tell you the same

[Missileman]

You can also have the old one reconditioned with similar sized turbine and compressor wheel, and still run the old ECU with stock tune. Just post up you questions in this thread... http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/

[Cizzink11]

Not keen on re using or hi flowing. I need around 200kw to get the big bitch moving.

Not sure about budget but was told garrett gtx3076 with .87 rear housing?

[Cizzink11]

This is it

[Cadmoon]

The issue is that you can only up the boost a little before you'll hit the factory ecu's limit. To get any more power you really need to be looking at some more serious mods

[Missileman]

well if you need power-up advice on a transplant, then try PM-ing Guilt-Toy

[RBrennan25]

Ok well I have the same motor, standard turbo, with just an exhaust, front mount and a piggy back ecu and I have 220rwkw on 100 octane.

There is no point buying a 3076 for your required application, you won't be able to run anywhere enough boost with the standard injectors, ecu and intercooler. Not to mention it'd cost around $2000 to buy it and put it on.

For your target your best option would be a highflow or the mods I mentioned I have. Either will get you there and cost HEAPS less

[Cizzink11]

What piggy back ecu?

[RBrennan25]

Nistune. That path is well trodden. Really all you'd need is a bigger intercooler and exhaust and up the boost to 12psi and you'd have 200rwkw. Or close enough anyway. They're pretty quick once you up the boost a bit

[Cizzink11]

Yea I clicked it up to 12 today, already got a 3" straight through but my intercooler is letting me down. Noticed a bit more go clicking it up a few psi.

[Luke William Thomas]

KKR480