Jump to content
SAU Community

Recommended Posts

Sup bitches. Just putting feelers out for my CBR. I can't justify the expense of putting rego on it right now, and given the reason is my housemate's buck's party in Thailand later this year, I could probably do with the cash anyway :P

EOI: 2008 Honda CBR600RR.

22,xxx kms (serviced by CMC at 21,093km)

Outstanding condition, never been in an accident. 100% stock standard except for the following (original parts and owners manual provided):

*Tirewatch remote tire pressure/temp display

*Oggy knobs

*Black adjustable short brake/clutch levers

*Brand new battery fitted - has done maybe 5km since.

Currently unregistered, but can provide roadworthy certificate at buyer's expense not a problem :) bike runs perfectly.

Located in Queanbeyan.

$8000.

I don't NEED to sell this thing by any means, so don't bother with ridiculous lowball offers. I will consider swaps for a motard or something fun and good for commuting, but prefer cash if it's going to go.

post-60560-14061043632499_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/445985-eoi-2008-cbr600rr/
Share on other sites

Shoot me an offer ;) priorities are shifting a little now that I've put this EOI up... I still don't NEED to sell it, but yeah I wouldn't mind finding something else for fun, like. A motard or registered dirt bike... Plus you're in ACT...more open to offers of its staying local, especially with an SAU member ;

latte sipping = many funs more than skylines

(says the guy who just bought another 33)

That's your issue. You got a Boat not a skyline. Come to think of it, that may have been troys issue as well.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...