Jump to content
SAU Community

Fixed Back Race Seats - R32 - Height Issues

Hornet2572
 Share

Recommended Posts

Hornet2572 Collaborator

Hornet2572

Posted
Posted

Hey All,

The time has come for me to put some proper fixed back race seats in my R32 GTR, so I organised to visit a seller today to "Try some on" so to speak, and found the most bizarre problem;

I am a short, dumpy sort of body shape, only about 180cm, 95kgs, and pretty stocky.

So after jumping in a few seats from Velo, Racetech, Sparco and Cobra, it appears that an X/Large is the best to accommodate my butt, shoulders and hips, and that's fine. But every single seat I sat in, my shoulders covered the harness slots in the back.

Both I and the sales rep were a bit confused, given that I don't have an abnormally long torso or anything, but nothing we could find worked as they all had the harness slots too low for me. The best we could find was one of the Racetech seats which my shoulders covered about 90% of the harness slot - The rep stated (and I agreed), that my harness angle would be considerably restricted even at that position.

We tried swapping the seat cushion padding between the seats to try and lower me into the frame a bit more, but no joy.

Has anyone experienced anything like this?

Or does anyone perhaps know of a certain seat that has particularly high (or large) harness shoulder slots?

Seems to be an odd problem to have, given that I'm not tall at all, I wonder how taller blokes deal with the problem?

Any help would be greatly appreciated.

Cheers.

White GTS-T Mentor

White GTS-T

Posted
Posted

I'm the same height as you, although admittedly smaller framed at 70kg, and I have no qualms with my (genuine) Bride seats. It might be worth seeing if you can get yourself in one to try it on. I know most guys here will scoff at this suggestion, but they are styled similarly to the standard seats, so if you're currently using the standard seats with a harness no worries, then it may be worth looking into. That or maybe a Recaro, considering the other popular brands didn't suit your needs.

  • Like 1
Roy Grand Master

Roy

Posted
Posted

Look for non-Hans seats. I have found HANS compatible seats usually have the harness mounts lower. My racetech seats is fine for me at 178cm and 105kgs

http://racetech.co.nz/shop/RT4009HR-motorsport-seats

Will have to check the tags but believe it is the wide and tall option

  • Like 1
Hornet2572 Collaborator

Hornet2572

Posted
  • Author
Posted (edited)

Thanks for the suggestions guys. I will try and get a look at a proper Bride and see if they're any better.

Roy - Racetech was one of the main brands I was testing in, tried about 3 different variants, all were wide optioned, and non HANS (Still street driven car, so definitely don't want the wrap-around head rest).

Edited by Hornet2572
Hornet2572 Collaborator

Hornet2572

Posted
  • Author
Posted

Hmm - Might be on to something there, Roy. I'm sure the fella from the supplier told me some were HANS and some were Non-HANS, and I just assumed that the HANS ones were the wrap-around ones, but maybe not. I'm going to chase them up again this week and see if they've had any luck with suppliers etc.

  • 4 weeks later...
  • 1 month later...
AMR33 Mentor

AMR33

Posted
Posted

Good to hear you found a suitable one mate. I am using a Sparco Pro 2000 and my shoulders cover a small portion of the harness holes, but still enough for me not to be able to run a harness safely so Im just using the stock seatbelt for now. Where did you end up getting your seat from?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...