Jump to content
SAU Community

Recommended Posts

Basically just wondering if people on these forums in NSW are involved interested in waterskiing and wakeboarding...

obviously it's not really the time for it (too damn cold) but just looking into some options to organise some outings/lessons for people..

Really just throwing around some ideas since it is a mad sport and a whole lotta fun!

Link to comment
https://www.sau.com.au/forums/topic/44744-wakeboarding-in-nsw/
Share on other sites

have you got a ski boat craved? i ski behind my mates malibu 04 wakesetter vlx, so im fairly lucky that one of my best friend owns one :)

i'm usually up at windsor (sackville) most sundays and even winter... best water and no crowds! you can't get much better than that :D you just need a dry suit!!!

aaa.gif

if you end up organising something, id be very interested.

duncan, i'll upload a wakeboarder behind a car tonite :)

have you got a ski boat craved? i ski behind my mates malibu 04 wakesetter vlx, so im fairly lucky that one of my best friend owns one :P

i'm usually up at windsor (sackville) most sundays and even winter... best water and no crowds! you can't get much better than that :P you just need a dry suit!!!

aaa.gif

if you end up organising something, id be very interested.  

duncan, i'll upload a wakeboarder behind a car tonite :)

nice, no i dont have a boat yet.. a mate of mine has and old lewis we use sometimes, but usually go out in a Nemisis wake board boat with the guys from Trojan Watersports in windsor (boat used to outside the shop all the time)

Sackville is very quiet usually, wont go out in winter but... not that keen.. but yeah usually ski around dad's corner depending on the wind!!

BOO57A,

saw you out there today on the Putty cruise, i have to hook things up just an idea atm, but if i can organise a few boats and a few riders should be able to set things up!!

Nice ride btw!! i was in the black MR2 behind you most of the way, after my car didn't make it past the go karts :cheers:

Hmm Mate just sold his Wakesetter, my gf's old mans Childsplay still goes aight with a few conrete blocks and lead weights down the back, franks what were you behind in your sequence shot?? Wake seems too tiny for a Mal or is it just not loaded?? Going for a weekend at my GF's brothers bucks party so that'll be fun but effin freezin if we cum off...

heh, a mate has a house on gymea bay, hacking is nothing short of a washing machine imho :cheers: once a big boat goes through the wake just rolls through the whole bay! :D - but im sure if your out early enough its okay :rofl:

craved, yeah houseboat thing seems very cool. especially since theres nothing to do on a houesboat but fish! :D never seen that vid, but i have a few others i downloaded ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...