Jump to content
SAU Community

Recommended Posts

Hi Guys,

Thought you guys could help me with this.

Getting a GTR complianced and apprently there is a problem with xenon bulbs in the R34 - they are not auto-leveling and hence need to be converted to regular lamps. Ok fine, but when I asked the compliancer to give me the bulbs when he has finished the conversion he said he has to destroy them under government policy. He even mentioned that they will get audited in regards to destroying parts that need to be replaced on cars for compliance reasons.

I personnally think he is yanking my chain - how the hell is the government going to audit "garbage"? Will the compliancer need to keep an every growing pile of "useless" parts until he gets audited?

I just want to know what I should do. I figure the car is mine/the dealers before the compliance, therefor anything removed from it still belongs to the owner.

Thanks guys.

The complier is absolutely correct, they are only allowed to comply totally standard cars and non-standard bits have to be destroyed...and they need proof that they were destroyed.

However....it was really brought in to stop ppl having a big turbo or similar, pulling it off for compliance and then putting it back on straight afterwards.

As I understand it your best solution is to put standard lights in before it goes to the compliance workshop...then neither you nor they have a problem....

I'd make sure I was standing when he destroyed the bits, never know could be making big dollars selling them off on the side (some shonky people are still about!).

But yeah I'd change them out before it got complied.

i imported my skyline under the new import rule and i didnt get anything destroyed...car was put totally bak to stock...then i paid him just the labour to stick everything bak on after it passed the blue slip....doubt the goverenment cares if u have them or not they are more worried bout it bein complied with stock parts so it cost the buyer a shit load to change things bak and forth...

oh yeh i forgot.....wen i took it to the RTA road worthy centre place to ge it all checked out.....the guy didnt even notice that the racing arms were left on wen he checked the underbody and that it was missin the R33 S2 air box not the S1 air box.....shows u they dont really now wats meant to b on an import and wats not...

Pentae didn't u buy a R34 GTR? i'm sure GTi-R's never came with Xenons unless after market...

And there is more to it than just changing "the lights" If you swap bulbs, powerpacks must be un-hooked and new ones put in for halogen bulbs. Otherwise, 4 door R34 halogen light ASSEMBLY's are needed. The entire headlight assembly. Can't just throw halogens in.

My compliance place isn't sure what they're doing with this yet, i told them there is a evidence package around for swapping powerpacks and halogen bulbs. So hopefully, i can keep em.

cheers.

Gohan: No, didnt end up buying the R34 GTR.

My GTiR I purchased at the start of the year came with aftermarket Xenons.

flight: I'd say your compliancing house is just trying to go by the rules. It would be a national tragedy to not pass compliancing on a $80,000 GTR.

Pentae didn't u buy a R34 GTR? i'm sure GTi-R's never came with Xenons unless after market...

And there is more to it than just changing "the lights" If you swap bulbs, powerpacks must be un-hooked and new ones put in for halogen bulbs. Otherwise, 4 door R34 halogen light ASSEMBLY's are needed. The entire headlight assembly. Can't just throw halogens in.

My compliance place isn't sure what they're doing with this yet, i told them there is a evidence package around for swapping powerpacks and halogen bulbs. So hopefully, i can keep em.  

cheers.

The compliance place I am using is modified the existing assembly to accept halogens. Unsure about which specific components are being changed/removed. I will find out because inevitably I will be changing them back to xenons. Just want to find out how much it is going to cost me.

What do you mean by evidence pack?

thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...