Jump to content
SAU Community

Recommended Posts

- Stock r34 gtt turbo 181,xxxkm on clock when removed was told is in good condition with minimal play. i have never ran it over 7psi and boosted fine when it was installed with stock turbo feed lines, gaskets, elbow, heat shield. $220
- stock turbo intake with stock snorkel/box/ after market filter and or pod filter with mounting brackets. $40
- stock rb25neo injectors 370cc, fine condition couple of cracks and chips on some of them. $10
- stock fuel pump fine codition. $10
- stock coil packs(all 6) good codition. $20
- stock front bumper indicators (bulbs not included) $20
- apexi N1 coilovers removed due to rear left shock leaking and front left slowly starting to leak, drivers side front and rear both good working order: $100 (will get photos if any ones interested)

- used condition OEM exedy replacement clutch installed june 2013 (roughly 5-10,xxxkm) extremely great street clutch, light pedal feel and very forgivable with plenty of meat on it. $350



Happy to mix and match parts to do cheaper bulk buys but will not seperate
All engine parts removed at the same time. 181,xxxkm
Can get more photos if needed
all prices are negotiable
reasons for selling are due to an upgrade
happy to post interstate at buyers expense
located in Geelong Vic,happy to arange a half way meet to people close, other wise postage at buyers expense

please feel free to inbox, but prefered method of contact is text via 0431394082

cheers jake

post-118280-0-18909900-1409450033_thumb.jpg

post-118280-0-08452900-1409450078_thumb.jpg

post-118280-0-24314100-1409450123_thumb.jpg

post-118280-0-92544400-1409450164_thumb.jpg

post-118280-0-88600100-1409450210_thumb.jpg

post-118280-0-18081800-1409450249_thumb.jpg

post-118280-0-53807000-1409450291_thumb.jpg

post-118280-0-24542800-1409450333_thumb.jpg

post-118280-0-40318900-1409450372_thumb.jpg

post-118280-0-64886200-1409450413_thumb.jpg

post-118280-0-56193700-1409450536_thumb.jpg

post-118280-0-70114200-1409450622_thumb.jpg

post-118280-0-07033400-1409450667_thumb.jpg

post-118280-0-09353100-1409450707_thumb.jpg

post-118280-0-15853000-1409450748_thumb.jpg

post-118280-0-80774100-1409450782_thumb.jpg

post-118280-0-36960100-1409450824_thumb.jpg

post-118280-0-62452400-1409450961_thumb.jpg

post-118280-0-96818500-1409451003_thumb.jpg

post-118280-0-83134500-1409451043_thumb.jpg

post-118280-0-45562700-1409451087_thumb.jpg

post-118280-0-37783100-1409451134_thumb.jpg

post-118280-0-03906800-1409451177_thumb.jpg

post-118280-0-58225200-1409451220_thumb.jpg

post-118280-0-96816000-1409451308_thumb.jpg

post-118280-0-02500400-1409451353_thumb.jpg

post-118280-0-70816500-1409451396_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/448083-vic-r34-gtt-stock-turboparts/
Share on other sites

  • 2 weeks later...
  • 1 month later...
  • 1 month later...

**Airbox/snorkel/pod/intake sold**


- stock front bumper good condition has been cut to fit front mount 150 (prefer pick up) can throw in the standard front indicators free of charge
- r34 gtt front fender and rear mud guards some scuffs but good condition
- standard r34 gtt rear spoiler, has a few stratches but good condition (have black wrapped the stands) 150 also prefered pick up

please note the parts are white

can get photos if interested

  • 1 month later...

price drop on clutch $250

also have r34 gtt gtr look alike front lip (in gel coat) fits standard front bumpers $100
price drop on parts listed above to $100, each pods $20

its just cable tied to the car in those photos and the ones on the floor are as is right now, never put it on because i went a different route, its 7/10 quality have been quoted 120 roughly painted and fitted

cheers.
jake

post-118280-0-90519600-1422006789_thumb.jpg

post-118280-0-86123200-1422006809_thumb.jpg

post-118280-0-39070000-1422006828_thumb.jpg

post-118280-0-61077600-1422006846_thumb.jpg

post-118280-0-77900200-1422006889_thumb.jpg

post-118280-0-54083100-1422006910_thumb.jpg

post-118280-0-95604900-1422006932_thumb.jpg

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...