Jump to content
SAU Community

Os Giken Push Pull Clutch Converter

iruvyouskyrine
 Share

Recommended Posts

iruvyouskyrine Grand Master

iruvyouskyrine

Posted
Posted

For sale is an OS Giken push pull clutch converter kit. This allows you to run a push type clutch (far cheaper and more readily available) on a pull type gearbox (late 32 GTR, 33 GTR, 34 GT-T and GTR)

It was on my gearbox when i bought it and i wanted to keep with my theme on complete NEO running gear so i decided to run with a pull type setup instead. I never saw this operate but the guy i bought the gearbox from said it worked perfectly. You can see that the throwout bearing has mot certainly been used so i have no reason to doubt him. I really dont know a whole heap about them but there is some info here.

http://www.nengun.com/os-giken/pull-to-push-conversion-kit

http://www.rhdjapan.com/os-giken-push-pull-movement-conversion-kit.html

If you have any questions just ask although i don't think i will be able to answer them. What you see is what you get, it does come with attaching hardware though just not in the picture.

Contact Josh on 0437 one 33701

PXuaW5I.jpg

INxZKQL.jpg

Link to comment
https://www.sau.com.au/forums/topic/448298-os-giken-push-pull-clutch-converter/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...