Stagea Awd Manual Box And Rb25Det Neo In R34 Gt4 Awd Auto

[25RBGT]

Anyone any ideas on tail shaft 34 gtr or stagea? Has anyone attempted this conversion before.

[Ben C34]

Gt4 tail shaft?

[25RBGT]

Hard to get manual gt4 tail shaft man.

Trying to explore different options

[25RBGT]

Box and motor is from a Stagea rs4s 2000. After a lot of research drive line is same as r33 gtr. Assuming 33gtr tail shaft is the go then.

Anyone see any problems I will come up against at all?

[GTSBoy]

It's unlikely that the actual GTR diff is in those Stageas. In which case the rear end of the tailshaft would not be the same CV joint style that is on GTR tailshafts.

For example.....R32 GTS4 is very much the same mechancially as an R32 GTR. But the diff etc is GTSt spec, not GTR spec.

[25RBGT]

So manual awd stagea u think has the same ass end as mine? Going to be hard getting one of them. Maybe get a one piece tail shaft is on the table.

[GTSBoy]

Um....just do what everyone else does, and cut'n'shut shafts to get what you need. It doesn't have to be plug and play.

[KiwiRS4T]

When I put the R33 GTR box in my Stagea I am pretty sure I just reused the auto Stagea driveshaft. Mind you I also used an R32 GTR diff. Stagea diffs have 3x2 bolt pattern for the axles. Measure one up to see. No ides what the GTS4 driveshaft is like though.

[25RBGT]

I will have to see what it all looks like when she's dropped out and go from there.

Thanks guys