Jump to content
SAU Community

Recommended Posts

Got it from a friend who bought it from autobacs japan years ago. Hand carried it on the plane home. Stored in for years forgot the specs.

I have attached some pictures to id it.

I mocked it up against a stock rb25det r33 turbo

-compressor housing looks same size

-exhaust wheel is bigger than rb25det turbo

-this garret turbo is oil cooled only

-has a 5 bolt internal wastegate plate (rb20/25 has 6 bolts) with 3 bolt to exhaust dump pipe

Compressor markings :

> A/R .60 Garrett M10 A.0. 2

>430753-7X

Exhaust Markings

> DH 3/4 Garrett M4

> A/R 63 or 67

Garrett Plate Markings

>14420-15P60

>444008-5

>SC 0125J

>Made in Japan

Is this a Journal bearing turbo or Ball bearing?

would also put this in a r32 rb20det engine.

post-90625-0-82454200-1411138203_thumb.png

post-90625-0-10984000-1411138231_thumb.png

post-90625-0-40374900-1411138262_thumb.png

post-90625-0-83121200-1411138289_thumb.png

post-90625-0-60667800-1411138311_thumb.png

post-90625-0-67055600-1411138326_thumb.png

post-90625-0-09030100-1411138351_thumb.png

post-90625-0-44213800-1411138379_thumb.png

post-90625-0-74502900-1411138415_thumb.png

post-90625-0-04676900-1411138749_thumb.png

post-90625-0-71059400-1411138760_thumb.png

post-90625-0-75271300-1411138769_thumb.png

Link to comment
https://www.sau.com.au/forums/topic/448803-id-this-garret-turbo-t3-flange/
Share on other sites

Based on oil cooling only I will say it's a journal bearing.

And not worth much. Do you plan on using it? I wouldn't bother.

do u think this would make the same power as a rb25det (series 2 turbo nylon and ceramic wheel "45v2 21U") which is currently installed in my hcr32 rb20det.

also got 500cc high impedance injectors (ASNU serviced) and nistune waiting to be put in as well.

im thinking it will flow better because of the bigger exhaust wheel? and exhaust housing is slightly bigger than the stock r33 rb25det 45v2 21U turbo

I'd try to ditch this turbo and see if you can pickup a highflow. Dicking around with this turbo, making a custom dump flange etc. Pain in the ass. I'd prefer to spend a little more on the turbo for a bolt on setup and harness more power and better performance all round(response and general feel). Response is the real factor with these sleeve bearings vs ball bearing/bush bearing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...