Jump to content
SAU Community

Recommended Posts

My M35 runs an aftermarket headunit direct to speakers and I've had this issue since I bought it years ago. Basically if I turn my music up loud it lasts a few minutes (sometimes a solid 15 minutes or so) but eventually all quality is dropped, volume decreases and gets fuzzy/low end gets cut etc.


I always thought it's probably just a faulty head unit but I've since replaced it and I have the exact same issue. Any thoughts on what it could be/how to fix it? I don't even know where to start?


It's just a standard head unit wired in (no amps, subs etc)


Any help would be greatly appreciated!

  • 2 weeks later...

You are probably overdriving the output transistors and they are shutting down from overheating. If you want to play it that loud you may need an amp.

Hey Scotty, Thanks for the advice. I had thought the same so I went out and bought an amplifier but it did not solve the problem. It seemed to solve the problem for about two days and then right back into it the only difference is that now the volume/power comes in waves; ie it will drop off, then come back a few seconds later, then off again etc. In the past the volume cut until you skipped a track and then it would come back for a few seconds until it dropped off again.

The only change that I can think of that happened on the third day that it started failing again is that it was a cold morning so I used the heater, is that possibly related?

If any one has any advice it would be greatly appreciated!? we aren't even talking excessively loud volume here (just enough to be clearly audible with an open window) and it's an issue that I can never get to the bottom of.

So you definitly do not have Bose speakers? Just the normal Nissan stock ones?

Well I have never checked the labels on the speakers underneath the door cards but unless someone has previously changed the centre console all signs point to no. No sub in boot etc or anything either. Would it change the situation if they were the bose speakers?

Bose system has amps and also low impedance speakers. Driving them directly would give problems on several levels..

Might be worth fitting some quaility front speakers and disconnecting the rears. That should fix the issue, as well as sounding better... Assuming that the new head does not wierdly have caught the same problem as the old one...

Bose system has amps and also low impedance speakers. Driving them directly would give problems on several levels..

Might be worth fitting some quaility front speakers and disconnecting the rears. That should fix the issue, as well as sounding better... Assuming that the new head does not wierdly have caught the same problem as the old one...

Thanks for the tips. Well I swapped the head unit over but used the same wiring jack (it was the same brand so didn't require a rewire). However it doesn't make sense that it would be a short circuit to me because surely then it would be blowing fuses and it wouldn't matter what volume it's at, right? Is there something else in the wiring of the Stagea that could cause this?

in the c34 Prime as I have they use a common ground for the speakers , when I did mine I had to totally rewire the system to create independent speakers , maybe run some wires externally to see if it works before the rewire.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...