Jump to content
SAU Community

Recommended Posts

  • 10 months later...

Just a small update, maybe it's usefull for someone in the future.


I bought the -9's and got them fine balanced. I don't have a dyno graph yet because it was just mapped on the street, but I'm very happy with them. Full boost (1,45 bar) is at 3900-4000rpm with Tomei cam gears in stock position until now. Will adjust this on the dyno in the near future and see what it will do for better spool, I'm sure this will bring some extra response and midrange power.


I really like it, that I get the same boost earlier than before. 1 bar was at 3800rpm before, now it's 1 bar at 3500rpm.

Edited by GT-R David

The Garrett balancing is max of 1g up to 30000rpm and max 2g after that.

Mine are balanced to max 0,2g now.

Can upload a chart of the balancing if someone is interessted.

Wasn't that expensive, so thought I maybe won't feel a difference, but won't harm.

This for example is what a normal balancing diagram looks like:

rover-75-1.8-turbocharger-cartridge-chra

The balancing from factory is anywhere below the big line.

I attached a picture of one of mine now

post-136947-0-54129100-1442040459_thumb.jpg

You can see the big line on the left corner. The balancing should be anywhere below the line to meet the manufacturers specification.

I think you won't feel a difference at all. All they say, the Turbos last longer with a better balancing.

This is how the biggest Garrett dealer in Germany discribes the Garrett balancing:

Garrett balanced the core assembly of the GT-R and GT-X turbocharger according to appropriate guidelines in a reasonable and cost-efficient framework. This balancing is usually sufficient. If it's not enough for you and you want a more exact balancing for your turbocharger, we can perform this for you. The costs for this is 130EUR. The work delays the delivery of your turbocharger to a maximum of one working day.

Before and after adjusting the cam gears?

Yes I will.

Before and after adjusting the cam gears?

Yes I will.

should be a big difference, the inlet cam really responds well to adjustment on the RB26

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...