Jump to content
SAU Community

Recommended Posts

As per the topic i am considering buying this used hks gt-rs turbo for my s15. I have bought a few used turbos before but i just thought i would ask here for some more opinions, I am mostly concerned about the amount of corroision and the colour of the exhaust wheel and wastegate flap. Does it look like its had a hard life? I have the money to buy a new Gt2871R but this used turbo is less than half the price and i wouldnt mind saving the money if it looks ok.

Thanks guys

post-4425-0-18082600-1412723642_thumb.jpg

post-4425-0-59643800-1412723714_thumb.jpg

post-4425-0-88227800-1412723746_thumb.jpg

post-4425-0-19809100-1412723769_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/449502-does-this-used-turbo-look-ok-to-buy/
Share on other sites

Apparently the turbo has no shaft play and no marks on any of the compressor/exhaust wheel fins or inside the housings they run in.

I'm mostly concerned about the colour of the exhaust wheel and really and havent been able to find much info on it. The turbos ive bought in the past have had black sooty exhaust wheels. the only other turbo i have at home in one i changed on a saab because it had stopped spinning and the exhaust wheel on it looks a similar colour to this gt-rs

Im wondering if it was running to lean, or if it was on e85 or another type of fuel, there is very limited info from the seller as he bought a rebuilt sr20 and it came on it.

I would personally buy one new if you can't see it in person, heck I'll even throw in the Hypergear turbo idea... probably matched performance and new for a little more than that 2nd hand turbo... not to mention awesome support & warranty

buying a 2nd hand turbo is always a bit sketchy as it is super easy to clean any oil out of the comp housing to mask seal issues.

Buying one 2nd hand without seeing it in person is even more sketchy.

I'd suggest the hypergear line. Message Tao and tell him what power range you're looking for and he will tell you which turbo will do it with the best response. Easy; and as Johnny said it will have a warranty.

I'd be willing to bet it's not that much more expensive either

I believe the guy that there is no shaft play and have had luck buying used turbos before that are still running fine 10 years later. Anyway what is the hypergear equivalent to a 2871r 52t .64 or gt-rs. I know they are the same lets not do the Hks vs garrett debate on this turbo.

I don't see the point of going one size up with a 2860rs .64 aka disco potato .64. I don't want to change the cams from stock and want 230-250rwkw. I'm thinking upto 20 psi boost no more on 98 octane.

Stock turbo is fun and handy around town but I'm just bored with it really

  • 2 weeks later...

mate be VERY careful about buying any second hand

I just went through the headache of buying "5000km old" GT SS turbos, looked fkn immacualte, mechanic inspected said fractional shaft play on one, oither was g2g.. once installed it was fked out and wouldnt boost properly when getting tuned.

Cost me an extra $5k for new turbos, stud kit, labour of the changover, tune and then the extra 2 and half hours of tuning already conducted on the old set (what should have been 6k for my job turned into 11) because a second hand turbo that seemd fine was bad

Not saying this will happen to you, but you need to ask yourself is the 1k ish saving worth the thousands of dollars of risk and the uncertainty of what your getting. Plus the GT2871 (or equivelant) will be a more powerful unit, so it depends if you want more room to move.

my 2c

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...