Jump to content
SAU Community

Recommended Posts

19x10.5+22 wont hit the suspension, but +22 is just a tad to small from the aggressive look!

+ 22 will sit just in side the guards, if your looking for a flush look with the guards like a nice aggressive stance, get 18/19x10.5+12/15
or if you want it to poke just a little anything around the +9 with a 10.5'' wide tyre would look good!

google how much ce28 would cost brand new and then see what condition they are in. if brand new still in box I would pay 90-100% of what they cost.
if a few scratches and dings you could look between the 60-80% mark depending on the condition.
not that you don't trust your mate, but ive never bought second hand rims, as you never know the condition of them, ive got mates that have bought second hand rims and 9/10 rims they have had a buckled wheel. and tbh if your going to own a 34GTR and you want a nice set of rims, why not save up and get brand new ones! :)

  • 4 weeks later...

Thanks for the replies guys.

I have tried to look for new prices but CE28 in 19" have been discontinued ! And its impossible to find 19x10.5 +12.

Would 3.3K be a good price to pay for them ? :D

These wheels in 19 x 10.5 are $1000 each plus shipping from Japan or America, doubt you'll find brand new in Australia unless you wait 3/4 months for a company to make an order.

There not discontinued either. Hope this helps?

If there in good nick and you got the dollar then worth it, plus these wheels look mad on the 34gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...