Jump to content
SAU Community

Recommended Posts

$100 buys you HKS Suspension from my car that I've never driven. Isn't that a puzzle?

Terry-60_zps12df8cfc.jpg

My BNR32 is still going through compliance and I've never driven her. This suspension has now been replaced.

Terry-64_zpse11794a5.jpg

So this set is a bit of a lucky - or unlucky dip. These could be worth a lot. But if they're 20 yrs old, they could be worth very little. Treasure or Trash?

Terry-63_zps49feb4b1.jpg

Yes, there's been surface rust through the car sitting outside.

Terry-62_zps741a5051.jpg

I can't detect leaks. The wetness is purely from WD40. Rubber boots are in good nick.

Terry-61_zpscacd69f7.jpg

The compliance centre said that the car rides fine without cap slap. Progressive springs helped. Probably for street, but not sure about track wk.

Terry-36_zpsc2e1370c.jpg

This is how the car sits with them > tyre wear has been even across the tread.

Pick up from Lower Blue Mtns thanks.

They look like their in pretty good nick Terry my mate had the same set in an S13 and I'm pretty sure those are rebuildable and are the hypermax D if I didn't have my teins I woulda taken a gamble on these hehehe lucky dip indeed !

BARGAIN IF YOU HAVE A R32 GTR SOMEONE BUY IT NOW BEFORE I USE IT TO MAKE A COFFEE TABLE

Wut? No excuse for breaking dropped china hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
    • I installed my link ecu shortly after. But car ran fine with stock ecu and r35 coils, just had the traction control and slip lights on.
×
×
  • Create New...