Jump to content
SAU Community

Recommended Posts

Hey all

Took the track car out to the 1/4 mile drags on the weekend.

Wasnt a full on meet or anything more a come and try / test.

My HUGE problem was bogging down hard at the start, not being able to launch at all.

Running slicks i couldnt get off the line at all.

Car is a r33 gtst has 335kws, manual etc

it didnt matter how many revs i put through it nothing was working for me.... any ideas??

Once off the line and going was strong

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/449899-bogging-down-launch/
Share on other sites

What time did it run? What 60 ft? Post the slip please.

Your running a 3076r hta right? That should get on boost pretty quick. Perhaps it's down to the tune, did you get the temp sensor in place and a retune yet?

I was out there in my stagea , had dramas first pass and couldn't be stuffed sorting it. Ran a 13.5 at 105 woth a 2.48 60 ft. with problems from a half track. 1 second slower than last time but still 2 seconds quicker than the other stag out there! The extra lag of gt35 and stock converter certainly didn't help...... was a bit over the car lately so happy to just park it.

I didn't notice your car, I would have said hi.

What time did it run? What 60 ft? Post the slip please.

Your running a 3076r hta right? That should get on boost pretty quick. Perhaps it's down to the tune, did you get the temp sensor in place and a retune yet?

I was out there in my stagea , had dramas first pass and couldn't be stuffed sorting it. Ran a 13.5 at 105 woth a 2.48 60 ft. with problems from a half track. 1 second slower than last time but still 2 seconds quicker than the other stag out there! The extra lag of gt35 and stock converter certainly didn't help...... was a bit over the car lately so happy to just park it.

I didn't notice your car, I would have said hi.

Hey mate i didnt get the slips from it. i cbf was pissy lol... i should have but threw in the towel after 3 runs. Will get back out as soon as the car is better sorted.

Na its still not sorted at all, boost comes on late still. The only reason i ask there was a few stockish 32s and 33s getting off the line a hell of a lot better then me with less hp.

I can only remember it ran into the high 12s each time

Was yours the white stag??

I was there late late. as i wasnt going to do it then decided to....

But had my bright yellow LH torana out there early if you saw that? but also had trouble on the day with that also.. hence why the towel was thrown in early and no slips were got lol.. all round had a shit day lol.

The Torana should run into the 11s but best that was sqeezed out was 12.3 with it breaking down from launch to mid track then ran perfect from there

Edited by Adz2332

My stagea is silver, the white one was running 15s.

I saw the torana and could hear it misfiring etc. Looked tidy though. Drag racing is heaps frustrating sometimes hey!

Don't be afraid to use the anti lag.

My stagea is silver, the white one was running 15s.

I saw the torana and could hear it misfiring etc. Looked tidy though. Drag racing is heaps frustrating sometimes hey!

Don't be afraid to use the anti lag.

Ah ok didnt see your silver one

Yer was missing but in second gear from mid track onwards was strong so will have to look into it. changed the carby jets and timing on the fly which made a little difference but will take it back and chuck it on the dyno and getting it back up....

Actually the Torana could have been petrol issue. was running avgas but couldnt get any so added 100 octane to it.. so it may not have liked the mixture.

So thats when we decided to shelve it and got my car out only for that to have problems lol....

bloody cars

and right now im in two minds....

I love drags and doing like mallanats etc.. but i wanted this car as an alrounder. like have a crack at drifting, hill climbs etc....

But a 2 speed power glide would make a big difference..........

You never answered what rpm you were launching at? The guy you were answering has a GTR, he may as well be the same as a GTS25t on slicks. On sticky tyres I was needing to launch mine over 6000rpm with a normal GT3076R.

What kind of trap speeds were you running, out of interest?

Ahh ok yer i have slicks on it.

i was launching from, started trying at 4000 then to 5000 then eased it off the line which actually did the best.....

Trap speed was around 110. i should have kept the slips, but between both cars had a frustrating day!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
    • You can trust Rezz!
    • Just to get this straight if you turn the splined shaft to the outside, it turns freely but the chain does not move? What happens when you move the chain, does the splined shaft turn? Surely the shaft is snapped, or the chain is seized and it took the teeth off whatever great is behind the steel bracket
×
×
  • Create New...