Jump to content
SAU Community

Wrecking R33 Gtst Coupe Rb25Det Manual S1

Sifty33
 Share

Recommended Posts

Sifty33 Enthusiast

Sifty33

Posted
Posted

Hey guys we are now parting a r33 gtst coupe s1.5

healthy rb25det s2 engine 140-145 psi cold, 135xxx kms runs like a dream... comes minus turbo, loom and ecu - $1100

rb25det box - $1000

wheels - sold

5 stud brake conversion - $450

manual conversion parts no box or clutch - $300

rhs door shell - $20

front seats - $50

rear seats - $30

drivers pillar trim - $20

drivers window switch - $70

non abs bmc - $30

clutch and brake pedals - $70

centre console - $20

surround around stereo - $50

manual shifter surround with new leather boot - $50

glove box - $20

side mirrors - $20 each

engine cross member - $60

steering rack - $50

castor rods with new bushes - $40

kyb shocks with lowered springs - $150 for set

front callipers and rotors - $170

rear hubs with brakes etc - $250

rear bar - $30

boot lid - $30

front guards - $50 each

rear reo - $30

window motors - $50 each

front strut brace - $60

rear strut brace - $60

catback exhaust - $120

fmic kit - sold

engine loom s2 - $150

coil pack loom - $50

pink label afm - $60

manual gearbox/alternator loom - $40

yellow jacket coilpacks s2 - $270

located in springwood 4127 but will post

contact 0420 767 957 for a fast response

post-57953-0-73532600-1413862436_thumb.jpg

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...