Jump to content
SAU Community

Recommended Posts

Hi Guys,

Seeing as when I run into a starting problem I try to get some info first, I thought I would post how I solved my no start issue for my R33 S2.

The car is great, best I have had as it rarely runs into trouble and if it does it is usually responsive to the first thing I do I love her!

Anyway, yesterday I got some fuel and went for a little drive. I turned the car off to run into the shop and when I tried to start her it was a slow start and died pretty much as the engine started. I tried a couple more times and would only keep cranking & cranking. Battery was good, got no codes from ECU, heard fuel pump prime and relay click etc. I was worried maybe fuel pump as I didn't really smell much fuel considering the cranking but that didn't end up being the case.

Narrowed it down to CAS or AFM. I had a spare CAS so I unplugged mine and undid the three bolts and removed it taking note as best as I could of the bolt position. I put the spare CAS in and it seemed to fit easier and was easier to turn and adjust. Guessed the correct position, tightened bolts and plugged in and she started first go! I was having the occasional slow start which I have put down to being the CAS now as well. For the first minute it sounded like it had a slight miss but after a run that was gone and it sounds so much better than before and starts great. I also gave my AFM a clean just in case which helped also.

Anyway, I hope this helps someone!

Here is a pic of her with her new wheels.

Emily

photo4_zps7997ff36.jpg

Link to comment
https://www.sau.com.au/forums/topic/450769-no-start-no-problem/
Share on other sites

Good point- on start up only when it has been sitting over night it will start and sort of feels like it is going to die, i don't put any throttle on and it picks up on it's own like jumps straight up to 1500rpm. Worth checking cold start valve? Want to take a look at that and clean my AAC valve :)

  • Like 1

Omg after all that it was actually the fuel pump!! It broke down again haha. I was suspicious of the lack of fuel smell after cranking so decided to listen out for it priming but only the relay would click.

It was obv a fluke starting last time but I did chuck some fuel in it and banged around in the boot. I used a rubber mallet the second time around and hit near fuel pump and tank and it started!

Maybe check out your fuel pump as could be the reason you are having rough starts also. Hope this helps!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...