Jump to content
SAU Community

Ipe Valvetronic Exhaust Review

IOWNU

By IOWNU,
in R35 GTR

 Share

Recommended Posts

IOWNU Grand Master

IOWNU

Posted
Posted

Hi all,

Having recently changed from a 2012 GTR to a 2014 Black Edition GTR, I found out the hard way that my Meisterschaft that was fitted on the 2012 was incompatible with the 2014.

After some research, I decided to go for the IPE exhaust. Full system includes cat bypass pipe, y link, midpipe and valve control muffler.

I must say, the exhaust note is excellent. Very loud with the valve open, comparatively sedate with the valve closed. A little bit of rasp and a little bit of drone, but nothing excessive. Additionally, you can use the valve control remote to set the system on "AUTO". This opens the valve when under heavy throttle and closes it at all other times. Overall I'm very happy and would highly recommend this exhaust to R35 owners. Feel free to ask any questions here or via PM.

Cheers

Ali

IMAG4095_zpsd390e861.jpg

IMAG4094_zps3d67f8e9.jpg

IMAG4093_zps8db3e7e3.jpg

GTR-R35-01.jpg

GTR-R35-01.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/451173-ipe-valvetronic-exhaust-review/
Share on other sites
  • 1 month later...
  • 4 weeks later...
  • 2 months later...
  • 2 months later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...