Jump to content
SAU Community

Recommended Posts

Today i saw a r34 drift car. Would it of been a gtr converted to rwd via drive shaft, or a model skyline with rwd already. Or still awd, doubt it but possible.

Also could a strip and n/a r33 and engine swap it to build a drift car or would i need to buy something lighter.
(I know nothing about drifting but really want to learn)
cheers.

Link to comment
https://www.sau.com.au/forums/topic/451486-skylines-as-drift-cars/
Share on other sites

Any Skyline will be a great car to learn to drift in.
R33's are good, relatively cheap to buy and strong engine/gearbox/brakes etc. Drum handbrake is a bonus too.

Realistically though, any Skyline will be fine for drifting mate, doesn't have to be anything special.

  • Like 1

get rid of the r33.. get yourself a S CHASSIS (s13,s14,s15,180sx) and go from there. So much better to drift and much more nimble and comfortable. (i have drifted both my r33 and my brothers 180sx and id choose an s chassis any day)

Ideally that's what i'd want but i'm thinking of turning my n/a r33 into a drift missle after i get my full license and go turbo :P
At least for my first drift car as I will probably destroy it trying to learn

I am currently converting a R33 gtst into a drift car.

I went to driftx a couple of weekends ago at calder and there must have been 15 R32/33s so they are a popular car.

I like the s chassis and was looking at these but too many people think an s13/14 is worth too much money. I ended up with a R33, may not be the best but it's a learning machine.

From my experience with most motorsports, just get something and get out there. The s chassis may be more nimble but starting out you won't take advantage of it. Best to have a cruel master that teaches you to be careful on transitions to improve your skills.

I think you could use the na to learn but would change cars rather than slap on a turbo to yours. Maybe do beginners on the na and buy a different car when getting more serious.

My 2c

  • Like 2

r33s are popular due to their strong drivelines and good brake setup.

You can learn to drift in a XF Falcon if you're mustard. But learning in something that works good will make your drifting skills better. If you have a car that's uncomfortable to drift or something that doesn't handle as well as an s chassis you'll never build the confidence to really push it, instead you'll stay at the same spot skill wise.

Not saying go s chassis to be lazy and it does all the work for you, but they're a better handling vehicle which in turn will give you the confidence to drive harder and get more angle etc.

Also alot of the time its power, never start off with a high power car because you'll never grow the balls to actually use the power to its limit.

just my 2c

  • Like 1

Any R/S chassis with a properly locking diff (2 way, shimmed standard or welded [im not going to judge you]) is a very capable drift car. Make sure it doesn't have any boost leaks, that it has an adequate cooling system, a check of the AFR's and a good fuel pump would be my prerequisites if I was about to get into it.

If you have a bit of cash to throw around then next mods would be front mount intercooler, exhaust, electronic boost controller and oil pressure/temp and water temp gauges (don't trust the standard ones) but any car you buy now will have some/most of these already.

You will be amazed how far you can push a standard car before the car become the limiting factor and not your skill as a driver/size of your testicles.

Your user name is awesome. Yeah i was just asking about n/a because i currently have a n/a r33. but a n/a 180 makes less power then my car so my only option would be turbo.
Can someone help me make a list of affordable drift cars. between 5k-10k (buying price excluding mods)


cheers

Edited by SkylineR33RB25

Where are you located? Just trying to figure out what tracks you would be drifting. My mate started drifting in a bog stock NA R33 with a 2 way, and he f**king kills it for it being a non turbo car. He actually won the amateur series and was the only NA car in the field, so skidding an NA r33 is definitely possible but he can really steer very well.

Personally I would either buy a turbo S13/180 (SR not CA) or a R32/33. Can pick up a fairly standard one of any of these cars for 5k. 33's seem to be especially cheap at the moment.

You do have the (harder) option of turbo'ing your current car, but you would have to replace the gearbox with a 25 turbo box which is a $1-1.5k adventure on its own.

  • Like 1

Did a bit of research i think my best options are;
an s chassis (s13-14 180sx 200sx), skyline (r32 r33 turbo rwd version maybe even an old r31?) or toyota supra
Just a lot of browsing car sale websites till i find a banged up one without rego.

Edited by SkylineR33RB25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...