Jump to content
SAU Community

Eoi - Parting Out R33 Gust

cuong nguyen
 Share

Recommended Posts

cuong nguyen Proficient

cuong nguyen

Posted
Posted (edited)

EOI - I’m thinking of parting out my white 1996 r33 gtst s2 skyline,

this is a EOI at this point as i wanna see how much interest there would be in all my parts before i start parting out the car.
Not unless i have a fair bit of interest in some of the main parts will i start parting out.
i have the car for sale as a whole and would be happy to sell as a whole car but if i get good interest in the parts i will start to part out its just more work and seem a bit of a shame to part out but what ever get the job done.
Here are some of the parts i have
-haltech platinum pnp for rb25det w/boost solenoid $1650
-greddy style forward facing plenium $200
-nismo side feed 740cc injectors in standard fuel rail $300
-Tomei Fuel Pressure Reg $80
-rb25/30 motor had standard rebuild about 5000kms ago
-Block was honed
-new rings, bearings rod & mains, head studs & head gasket
-all genuine nissan parts
-head is a s2 rb25det head
-VCT deleted running rb20 cams
-grub screw the oil feed
-Rb25 oil pump
-new gaskets
-new thermostat
-Motor had perfect compression of 170psi through all cylinders
$2400
-garrett gt3076 .63 rear w/braided oil & water lines good condition $1000
-eBay stainless steel high mount manifold $150
-38mm turbosmart external wastegate $200
-kinuwaga td06-25g turbo v band rear used for only about 1000kms good condition $600
-super spark coilpacks $200
-apexi safc $100
-apexi rsm $100
-front mount with all piping $200
-3inch exhaust from turbo back $300
-profec b type 2 ebc $180
-rb25 carbon coil pack cover $50
-Raditor $100
-rb25det gearbox with nismo short shifter. very tight box no crunching $1200
-carbon style steering column surround $100
-standard steering column surround $50
-r33 twin gauge pillar $40
-universal single gauge pillar $20
-r33 gtr cluster with blue led lights. 62,000kms i think $300
-r33 gtst cluster with 9kms $250
-r33 gtr 3 gauge center din $150
-stock carpet set $160
-r33 genuine gtr spoiler $250
-r33 gtst s2 front bar primed ready to spray $150
-r33 gtst wantannabee coilovers $400
-rear ajustable camber arms $50
-white GTR gear & handbrake boot $80
-r33 gust led tail lights $200
-s2 bonnet ok condition $120
-front guards pair left side good right side has scratch on it $120
-Bootlid $100
-Rear bar $100
-fibreglass GTR style grill $80
-s2 grill $50
-s2 Headlights fair condition pair $300
-climate control unit $80
-r33 gtst front and rear brakes $400
-Catch can $40
Ill take some pics tomorrow if not thursday as ill be away for work till then.
all other body and inteior parts available just ask me for price
If theres any parts that arnt listed then just ask me about them and ill give u a price and let u know condition of the part.
the car is located in canberra but I’m willing to post things at buyers cost.
i guess if any other questions then just pm me and ill get back to you.
i will accept paypal bank deposit or COD as payment method
Pm me for my number if u want.
Thanks regards Viet

post-22213-0-08830200-1417959176_thumb.jpg

post-22213-0-78421700-1417959199_thumb.jpg

post-22213-0-98352500-1417959213_thumb.jpg

Edited by cuong nguyen
Link to comment
https://www.sau.com.au/forums/topic/451491-eoi-parting-out-r33-gust/
Share on other sites
driftnoob Apprentice

driftnoob

Posted
Posted

Interested in the haltech (assume by pnp you mean the pro), front mount (brand?), exhaust (brand), rear adjustable camber arms, door locks (mine have been busted by would be thieves), front strut brace?, rear strut brace?,

Is the radiator a bigger aftermarket? Might be interested in it too.

cuong nguyen Proficient

cuong nguyen

Posted
  • Author
Posted

hey sorry about the delay but i think I'm going down the route of parting my car out.

if i have any parts that have multiple interest it will go to the highest offer or who ever has cash.

heres pics as promised if there are any parts that i haven't mentioned the price for please just pm me as there are a lot more parts then expected.

parts are all located in canberra but I'm willing to post at buyers expense.

most parts are priced reasonable so please no low ballers.

heres a link to pictures of most the parts any other questions please feel free to pm.

thanks for your time

regards viet

skyline parts

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • LaurelPWR
      Forced Performance Hta Turbos

      By LaurelPWR · Posted

      That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Dose Pipe Sutututu
      Forced Performance Hta Turbos

      By Dose Pipe Sutututu · Posted

      Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...