Jump to content
SAU Community

Recommended Posts

I remember reading somewhere that there were a couple variants of the HKS GT2530's as well as the KAI model. I'm assuming this means HKS updated them along the way, does anyone know if this is true and if so what are the difference and how could each be identified?

Any info would be greatly appreciated

Link to comment
https://www.sau.com.au/forums/topic/451492-hks-gt2530-variants/
Share on other sites

all share the same CHRA/wheels except the kai.

Housings differed like mentioned.

RB26 housings also differed mainly on exh side, early had no splitter late had a splitter on the outlet that was flush to the outlet flange. Apart from that some minor gate differences

No real power difference if your using a 1-1.5'' wastegate separator in a bellmouth

They should all be using the same cartridge and wheels 446179-21 from memory . I seem to remember the KAI version having a port shrouded compressor housing so was likely a single turbo version . The main unique part today is the 60mm 63T compressor wheel and I think it was only ever used in 2530s and one other app I can't remember .

You can turn any GT2860 with the same turbine into a 2530 if you have the original undamaged compressor wheel and housing . Swap the wheel in balance and bingo new guts .

A .

I remember reading somewhere that there were a couple variants of the HKS GT2530's as well as the KAI model. I'm assuming this means HKS updated them along the way, does anyone know if this is true and if so what are the difference and how could each be identified?

Any info would be greatly appreciated

why do you ask? perhaps if we had a bit more info on the specifics of what ur trying to find out it would help...

why do you ask? perhaps if we had a bit more info on the specifics of what ur trying to find out it would help...

I'm gathering parts for a turbo upgrade. I'll be looking for roughly a safe 320rwkw but more power down the track so I'd like to get the right turbos from now, hence why I'm looking at the 2530's. I know -7's or even -9's would be better suited to that 300+ mark but any more power later on will be maxing them out. So I guess at the moment I'm just trying to educate myself on my options.

Just get the -9s.

Sell the -9s if you ever decide to go for 400rwkw and get 2530s in 2/3/4 years (or more) and enjoy the -9s for their application for now because realistically 2530s is motor out/rebuild time anyway. So changing turbos isn't a big expense.

  • Like 1

Might also depend on your demographic, i.e Sydney lots of 40/50klm zones and not much

in the way of over 80klm higher load gears, a few hundred rpm of boost threshold and

less off boost power can make driving around on bigger turbos tedious.

The opposite if you live in an area with lots of open roads or highways. I.e rural or

the US. You can get away with larger turbos since you are mostly above 80klms with

very little time spent in stop start traffic and low speed pot holed filled corners,

stupid 40klm school zones with not a single kid in sight. In this case you can go

for the -5 or 2530's and just not spend enough time off the boil to care.

End of the day, it still comes down to drivability first as the main consideration

on size, then peak power goals.

I will tell you my experience. I had a unopened motor with -5's and they were a little laggy (running 345kw atw) but on the open road they are great. In the city not to much (as above).

When I rebuilt the motor and did head work now pushing 400kw the -5's have come alive. Still running 2.6L and they are more than fun anywhere haha. I wouldn't waste money getting 2 different sets of turbos (selling one for a loss later) if you plan to rebuild. Go for a set you want to keep deal with the lag at first then benefit later when you rebuild. Less cost when you do rebuild.

Also as Jeremy Clarkson said - lag can be fun at the lights when people think they are winning then they wonder where you have gone.

Yeah I do see where you're coming from but would the -9s be that much better than the 2530s for my goal that you can justify doing it twice?

Absolutely. Turbos are the most important thing to choose. They decide everything in a set-up in a stock-ish scenario.
You are talking about $1,200 or so. So like I said if you plan on not rebuilding etc for 2 years or more - then change it out when the time comes.
I've had both -9, -5s and modified -9s... The -5s around town, hill runs, motorkhana etc as stated, are tedious on a 2.6l. -9s win for a car doing that type of work hands down.
-5s come into their own above 120km/h-150km/h+. You just gotta ask yourself how much time are you spending above that? And go from there.

Would HKS GT-SS's be an even better option?
Thanks for all the help guys

Much more research needed. The Garrett -9s and HKS GT-SS are the same turbo, just a different branding. HKS "kit" just comes with everything you need to bolt on, oh and a much higher price tag.

For my project the motor will be just one aspect in a sort of complete rebuild with suspension next and ultimately paint and interior so I think what ever set up I go for now will pretty much be it for a while (providing the motor doesn't give up). Having said that though I do miss the punch my 33 GTST used to give so maybe that little bit of lag given by the -5 will be enjoyable but I definitely don't want to have to go 120km+ whilst ringing it's nuts for the turbos to show what they've got. My best bet would be to experience most, if not all of my options first hand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...