Jump to content
SAU Community

Recommended Posts

Anywhere in Brisbane that people can reccommend without me being ripped off (for being a female) to get the new clutch installed and get the gearbox fixed. I'm too affraid to drive it to gavins.. because it might break.

I will ring around tomorrow and I just want to get the new clutch put in (when i get it) and get the synchro changed in the box. We aren't millionaires or computer nerds.. So at this point in time this is all we can afford. I know most of you will say "Get the whole box fixed" but quite frankly, we will struggle to get this fixed.

Soo.. just opinions on where to take my car in brisbane to get it fixed.

Thanks in advance :D

Link to comment
https://www.sau.com.au/forums/topic/4518-gearboxclutch-places/
Share on other sites

But then.. wouldn't it be easier to do the clutch and gearbox at the same time? Save labour costs and stuff? I wish gavin would give me an account. It would be soo much easier :D

I'm seriously thinking of selling. Its just problem after problem.

The car has cost us up around $30000 now and there have been no mods done at all!

You need Squizz and Pete's mobile clutch services.

Available whenever they feel like a 7hr drive and payable only in beer. Not-fast, sort of reliable, crap service and swearing a guarantee!!!

As for the box, syncro's are over-rated :P

Originally posted by Squizz

You need Squizz and Pete's mobile clutch services.

Available whenever they feel like a 7hr drive and payable only in beer.  Not-fast, sort of reliable, crap service and swearing a guarantee!!!  

As for the box, syncro's are over-rated :P

Squizzter and Petester to the rescue :)

I love you guys :love:

I dont think you really know how much I appreciate this :uh-huh:

Get Squizz to do it!!! have seen their previous modifying projects (na/turbo 32) :lol:

Have heard that Direct Clutch are very good. mates of mine in Gladstone drove down to there to get their cars done there. I would've done the same when my clutch died, except i kinda welded the flywheel & clutch plate together. Interestingly i was able to still drive my car to the local shop this way. Just turned the key and the car lurched and then started. Could change up gear without clutch but not down. I did this very late at night so there was no traffic, cause i couldn't fully stop at intersections, just slow down and hope like hell there was nothing coming.

I know what you mean about selling. Allways thinking about getting rid of mine for something more sensible.

Know what you mean about driving with no clutch. Years ago I broke a clutch cable, had to drve to the bank, then to the spare parts dealer.

Cops in an unmarked police car pulled me over. Said I was driving erratically - er, well yes officer. They thought it may have been a stolen car, they were quite nice about it actually.

Then right in front of them, off I went jerking away in second gear by turning the ignition key LOL.

That amount is including 5000k's servicing and stuff as well.

Everyone has probably heard this all before but here goes again. The wire that goes from speedo to ecu was disconnected. So there for HICAS, abs and speed sensor weren't working. And we got the boost controller and boost gauge (the only "mods" we've done) that was around $1000. Then everytime I go in for a service.. they find something wrong so I have to go and get that fixed. Diff seal.. Changing the oils cost a fair wack to the pocket. Now the clutch and gear box. And also the odometer stopped.. Getting that fixed was a few hundred.

When you type it out here.. It doesn't look much. But we've owned it since the end of march.. I suppose you could say april and yeah. Just dont seem to be getting anywhere with anything. By the time we finish its going to be a bloody brand new car. AND STILL GOING TO BE SLOW!

Originally posted by NIZ30

Get Squizz to do it!!! have seen their previous modifying projects (na/turbo 32) :lol:

You now that thing did a 14.2 with no LSD :P Pretty scary under full noise changing 1/2 and 2/3 wiggled all over the place.

Yeah NismoGirl don't sell the car, if you've spent that much then there can't be too much left to go wrong with it. Unless you replace it with a brand new car you may end up in the exact same position with regards to the repairs.

It sounds like you got really unlucky, most Skylines do not have that many problems (though clutch/synchro's is common on ones ~7 years or older) but no matter what model of car you get there are always lemons (even Mercedes/BMW etc). At least once it's all fixed you'll know you'll have a good car even if it did cost you more than you thought it would.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...