Jump to content
SAU Community

Recommended Posts

Hello

I have a r32 GTS-T

Currently I have the intake, full turbo back exhaust, intercooler and boost controller on the car.

I am about to upgrade to a rb25 turbo, a tuned Tomei computer that is for my set up with a GTR fuel pump, and a 25 turbo, I think it is a boost up tune,. Not sure how much of a boost up tune it is.

Will my stock clutch handle this?

Someone gave me a ACT 6 puck un-spring clutch kit. http://www.rawbrokerage.com/act-6-puck-un-sprung-xt-clutch-kit-rb20det-rb25det-630ft-lbs/

Is this overkill for my set up? Will this be uncomfortable to drive on the street?

Edited by yoshiii335

Before you even worry about a clutch go and get a nistune instead of that tomei whatever.

You can't just go and put some random ecu in and expect the tune to be spot on for your motor.

Nistune is expensive here in Japan. Only two places does it. The place wants over 1000 dollars to tune it. From what I have read and been told on this forum, it should only be about 300-500 dollars for a tune.

The computer is tuned for myset up for a r32 gtst-t.

Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?

Nistune is expensive here in Japan. Only two places does it. The place wants over 1000 dollars to tune it. From what I have read and been told on this forum, it should only be about 300-500 dollars for a tune.

The computer is tuned for myset up for a r32 gtst-t.

Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?

"The computer is tuned for myset up for a r32 gtst-t."

No it's not. It's tuned for some other setup. You have no idea whether your engine will take the same amount of timing and you have no idea if your fuel system flows the same way as the car it was "tuned" on. Buy your self a TUNABLE ECU and give up on this cheap arse approach you seem to have.

"Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?"

That clutch will be a miserable motherf**ker to live with. Buy a sprung organic full face HD clutch from some reputable vendor.

"The computer is tuned for myset up for a r32 gtst-t."

No it's not. It's tuned for some other setup. You have no idea whether your engine will take the same amount of timing and you have no idea if your fuel system flows the same way as the car it was "tuned" on. Buy your self a TUNABLE ECU and give up on this cheap arse approach you seem to have.

"Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?"

That clutch will be a miserable motherf**ker to live with. Buy a sprung organic full face HD clutch from some reputable vendor.

Its not a cheap approach, I came into these items. I was actually searching for a affordable tuning computer or maybe going to MINES.

I will probably stick with a Nismo Clutch, that was the plan

Its not a cheap approach, I came into these items. I was actually searching for a affordable tuning computer or maybe going to MINES.

MINES = exploded engine. Do not do it. Expect to pay $2k for a decent aftermarket ECU and up to $1k to get it tuned. Expect these numbers and come to accept them. They are reality. That quote that you have for >$1k to tune a Nistune in Japan......Does that include supply and install of the board? If so, then the price is right.

MINES = exploded engine. Do not do it. Expect to pay $2k for a decent aftermarket ECU and up to $1k to get it tuned. Expect these numbers and come to accept them. They are reality. That quote that you have for >$1k to tune a Nistune in Japan......Does that include supply and install of the board? If so, then the price is right.

No, that is just the price of the tune.

MINES = exploded engine. Do not do it. Expect to pay $2k for a decent aftermarket ECU and up to $1k to get it tuned. Expect these numbers and come to accept them. They are reality. That quote that you have for >$1k to tune a Nistune in Japan......Does that include supply and install of the board? If so, then the price is right.

Why the bad rep with MINES? Ive never heard anything bad about them except their high prices here in Japan.

Are you kidding? They have a MASSIVE reputation for having too much ignition timing. That is probably more of a problem for Aussies, because 100 octane fuel is available in Japan and the Mines ECUs are probably set up for that, and we only had 95 for a log time, and only 98 now. But the real big problem is that people think that you can just grab a random ECU and stick it on your engine, with no idea of the relative merits of the ignition, fuelling, turbo size and boost threshold etc etc and just believe that it will work. What happens if the Mines ECU winds in too much timing in a certain area of the map because it was set up for a bigger turbo and yours is making boost there? Pinging? Detonation? What if your fuel pump is not as good as was expected when the ECU was mapped? Or what if yours is much better and maintains heaps more pressure at high load and rpm? What if your injectors are dirty, or have been swapped for something else and you didn't know? ETC ETC ETC.

Are you kidding? They have a MASSIVE reputation for having too much ignition timing.

<snip>

OP, are you talking about going to the Mines shop and getting them to burn a custom EEPROM for your car? (This is OK)

GTSBoy is talking about getting a random ECU with a Mines sticker and slapping it in your car. (This is not OK)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Would be good in your car I reckon Johnny. Have seen reports they don't seem to love circuit use and sustained high RPM, but there's so many variables and implementations it's hard to tell fact from fiction.  All that said, is it worth it in this car given how you feel about it? Probs not? 
    • I don't know specifically. I *do* know that it is very likely that historically most/all undertray replacements remove the inner liners and people just run without them. When you are hectic (or serious) enough to really want/need a different undertray, you are probably also running wider, taller or different offset wheels and the guard liners are the first thing that rub (or as I said in the other thread, they blow out at high speeds anyway) Of course, that is before the pricing went nuts on R34s, nowdays it is much more likely people want/expect to retain the liners to protect their overall investment
    • Haven’t had a chance to drive it properly yet. It was rwd and pissing down rain when I drove it home and now it’s in the air with the so I can change the oil. Going to do the  gearbox oil while I’m at it as well, may even do the diffs 
    • On 12th June, the mechanic could not figure out what the issue was, but the car seems to be flooding with fuel. He was suspecting the tune, thus referred me to a tuner. Although the tuner is not familiar with Nistune, last Monday (30th June), he came over to try and re-map it. Despite the tuner trying to completely stop fuel, it kept sounding like it was pushing fuel. Tuner ended up suspecting either the ECU or Injectors. I do not believe the ECU or Nistune is the issue, as the Nistune software reads and communicates properly. Today, I removed the (new) injectors to see if they are clogged or leaking. Surprisingly enough, after those 3 days of driving, injectors 2 and 3 look very blocked. You can see the difference in the picture. I blew a bit on 3, that is why it doesn't look as clogged as 2. I am still unsure if this is what is causing the no start issue, but I am now feeling that I may have bought the injectors and Nistune without the need to do so, as the problem seems to be coming from somewhere else.  
×
×
  • Create New...