Jump to content
SAU Community

Nissan Stagea C34 Rs Rwd Series 2 Wrecking All Parts Rb25 Neo

Ben C34
 Share

Recommended Posts

Ben C34 Grand Master

Ben C34

Posted
Posted

Look at recent posts for updated list of remaining items.

Series 2 rs (rwd) SILVER

Wrecking

All parts available. Car is undamaged and registerable.

If not listed ask. If a price is no good let me know, I'm negotiable and reasonable person. I want to sell the stuff, butnot give it away!

RB25 Neo bottom end, 140,000ks excelllent condition $500

Rb25 neo head, modiifed for external vct feed for 2530 use. including oil line and tee piece, standard cams and covers, no vct pulley or cas $600

vct pulley with mod to allow adjustment and diallling in of cams $100

Alternator $75

Starter motor $75

AFM, worked great $60

Neo CAS $200

stock air box and snorkel $60 suit R34 also

idler and tensioner, less than 6000k's use $50

HKS return flow type r cooler kit. Flowed just over 300rwkw no worries. Has been dented into something, doesnt leak or affect performance. This is a full size core, with no cutting required at all. Including all clamps and joineres etc. Been painted black. Can spin around and not see dented bit so all good! $250 Also fit R34 GTT

Very nice sounding custom 3 inch dump back exhaust. Below legal noise, no drone!!!!! Hoooker aerochamber muffler and berklee straight through rear, flowed over 300rwkw no worries, fits nicely. 1/2 of it is stainless, all mandrel bent $400

Standard exhaust manifold $50

rb26 oil pump $80 great for rb2530 build

R33 standard turbo, great condittion $180

Fan with clutch,no cracks, worked well $55

Alluminium radiator , pretty thick , stock shroud fits on it. kept car temperature controlled perfect, $100

Air con compressor $75

Power steering pump $75

Series 2 tail lights, complete, perfect condition $250

Headlights $250

Grill, dodgy black paintjob, $50

High beam lights, (spotlights in the grill ) $150

Standard RS front rotors, good condition,no shudder etc. $75

Front calipers with pads clips etc $50

rear rotors $75

Rear calipers $55

RE4R01B standard valve body $75

Instrument cluster (dash) auto, just over 100,000 ks $125

Power window switch $75

climate control unit $65

Steerig wheel and airbag, good nic, $75

Clear side indicators, fit a bit loose but never fell out! $25

Tailgate $100

RS4S alloy wheels, rear tyres 1000k's use, Maxxis tyres, front more use but still heaps left , wheels in good condition, few small marks $400

HEAPS more, cant remember, ask me for a price or make an offer.

PICS Available, cant be bothered uploading heaps of pics for no reason, ask me if you need a pic.

Cheers

Ben

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Ben C34 Grand Master

Ben C34

Posted
  • Author
Posted

What size and offset are rims

17 . That's all I know.

Stock rs4s rims, might check tommorow otherwise Google it ...

Cheers.

Ben

Race__24 Experienced

Race__24

Posted
Posted (edited)

Does the radiator have the transmission stuff in the lower tank?

Is the steering wheel tiptronic or manual?

Edited by Race__24
Ben C34 Grand Master

Ben C34

Posted
  • Author
Posted (edited)

Does the radiator have the transmission stuff in the lower tank?

Sort of. One of the fitting is stripped. I wouldn't run the trans fluid through the rad anyway. You are best off with a decent trans cooler. The rad loop is more a warmer than a cooler anyway.

Best setup is a huge trans cooler with a thermostat and fan. Even then depending on where you live most aussie places the thermostat isn't required.

Steering wheel gone.

Lots gone.

Pretty much just engine stuff left. Well that's not true, still got headlights taillights grill etc.

Pretty negotiable.

Depending on if a previously interested guy actually buys stuff I will have whiteline rear sway bar, nistune with licence and cable, z32, id725 injectors, fuel pump and cradle and modified lid, r34 gtt brakes new rotors and pads, and subframe lock kit

Edited by Ben C34
Ben C34 Grand Master

Ben C34

Posted
  • Author
Posted

Do you have an uncut reo? Are they the same as s1?

How much for the Nistune?

No uncut reo. Not sure if different or not

At this stage the nistune is likely sold, but if not I'll be in touch.

Race__24 Experienced

Race__24

Posted
Posted

No uncut reo. Not sure if different or not

At this stage the nistune is likely sold, but if not I'll be in touch.

I'm not 100% that it would be any use to me anyway, I'll need to wire it in parallel to the s1 ecu to keep the box working. I'll have to talk to some people.
Ben C34 Grand Master

Ben C34

Posted
  • Author
Posted

I'm not 100% that it would be any use to me anyway, I'll need to wire it in parallel to the s1 ecu to keep the box working. I'll have to talk to some people.

Yep. I should have realised yours was s1 based on the reo question!

Silly autos. They really screw things up.

I'm not sure what would need to be swapped to make it work. I wonder if whole box from s2 would do it (also have one, with servo and shift kit)

Otherwise if I was you i would just go full manual valve body and use whatever ecu.

Race__24 Experienced

Race__24

Posted
Posted

If I was to go manual I'd just go full manual conversion. I'm going to talk to the guys at mv automatics and see what it actually needs to shift.

  • 3 weeks later...
Ben C34 Grand Master

Ben C34

Posted
  • Author
Posted

Have you got the rear bumper bar?? Would this fit a S1. Price??

Cheers Shane

Rear bar gone.

Not sure if it would have fitted.

Ben C34 Grand Master

Ben C34

Posted
  • Author
Posted

Hey Ben do you have auto transmission? Cheers

Yes, it might be sold though.

Only suit rwd either stagea or r34.

With MV shift kit and billet second gear servo.

Will let you know if the other guy bails.

Cheers

Ben

  • 2 weeks later...
Buddha Boy Newbie

Buddha Boy

Posted
Posted

Hey after passenger visor, rear cup holder, rear boot handle cup and centre dash pocket and bonnet struts too.

Also still have the climate controller? Is it a single din or the large sat nav thing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • feartherb26
      RB25DE NEO with Haltech ECU

      By feartherb26 · Posted

      If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • Kinkstaah
      RB25DE NEO with Haltech ECU

      By Kinkstaah · Posted

      This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...