Jump to content
SAU Community

Recommended Posts

hey guys ..

few weeks ago i asked for some help and got some good response from some ppl here. just wanted to show you guys my results..

so the set up is rather simple..

fuel :am using a aermotive stealth pump with some dw800cc injectors

ignition: stock

engine: arp head bolts , wiseco piston stock compression,extended sump and harden oil pump gears and stock everything else..

extra: am also using a aem water injection kit..actually just using filtered rain water to aid our crappy 91 ron fuel ...

management : haltech plug and play

tuned by me :)

15 psi :336trq & 414whp

21 psi :409trq & 499whp

from the dyno graph i thought this would been lagy ..but i was so wrong ....car pulls and spools just as good as my old precision 6262 bb .makes more power at same boost. at 11 psi with the old 6262 i was making around 340hp & with the 8375 11psi car made around 370hp both without water injection

honestly very impressed for a turbo i paid 580us for compared to the 6262 which cost 1200us..

and all of this was done with a single scroll 8375 and a ebay single scroll $140us manifold..... may be i got lucky with manifold but its just as strong as the one i paid 400us for before.have put countless abuse on it and no cracks yet.

dyno graph and vid

https://www.youtube.com/watch?v=VfhW7fvX-Bg

Link to comment
https://www.sau.com.au/forums/topic/452309-rb26-borgwarner-8375/
Share on other sites

No doubt they are an awesome turbo for the price, I would love to see a back to back against the precision. These things spool like a beast and there's plenty more in that turbo for you if you put the money in the right gear.

I've been running mine with the full race twin scroll manifold and made 560rw hp on ethenol with a 2.6. Made 500rwhp at 5500rpm

I've since upgraded the cams and valve train, cleaned up the head, raised compression, stroked to a 2.9 and ceramic coated the exhaust side .. Results should be up within the month

Old graph.. Rubbish photo but its 98 premium vs E85

Note the car made no more power past 50/50 ethenol/98

post-47556-0-70740500-1420352595_thumb.jpg

No doubt they are an awesome turbo for the price, I would love to see a back to back against the precision. These things spool like a beast and there's plenty more in that turbo for you if you put the money in the right gear.

I've been running mine with the full race twin scroll manifold and made 560rw hp on ethenol with a 2.6. Made 500rwhp at 5500rpm

I've since upgraded the cams and valve train, cleaned up the head, raised compression, stroked to a 2.9 and ceramic coated the exhaust side .. Results should be up within the month

Old graph.. Rubbish photo but its 98 premium vs E85

Note the car made no more power past 50/50 ethenol/98

yep they do spool super fast for journal bearing turbos..... i was really worried when i first compared it to a physical size of a 6262 .

as you can see in the vid the moto sits in a s15 silvia which is super light ...the weight difference of a r33 at 3400lbs and the s15 2700lbs makes this car feels like its almost at 650hp...

with some cams and cam gears i should be able to get power in a tad quicker and make a higher peak hp...

looking forward to seeing your updated build results...

yep... but the results with the 6262 would not be applicable to compare because it was done with out water injection ..so the timing when tuning was alot different .but the 6262 did make 415whp at 20 psi where as the 8375 made 499hp at the same boost... but the 6262 was only running on a .63 housing which would make high hp numbers on such a big moto difficult .

i had read some where a guy changed out his .82 ar 6262 for a .63 and the results were minimal difference on his rb26..but i cant confirm that........i know on a 2.0 honda moto moving from .63 to .82 makes no difference ..

only results i have with both turbo is at 11psi without water spraying either ways and the 8375 did make more power then....

Ok thanks mate, would be good to see some more results on this turbo going around.. This night spark a bit more interest

Here is my thread on my results if you are interested

http://www.sau.com.au/forums/topic/414766-gtr-joeys-r32-gtr-e-flex-twinscroll-8375-results/

hey.. i used a .88ar back end because i was worried about lag as the turbo was non bb..

your dyno graph is a lil unfair comparison as the bigger ar back ends has 5psi difference .it may not look like much but once these turbo begin to spool the move from 7psi to 21psi in a heart beat... that may contribute to more power lower in the power band..

the twin scroll will help with spool up when combined with a twin manifold..

what moto are these graph from?

  • 9 months later...

Here is my graph on a 6262 by with .84 TS setup and 93 octane gas

611 at 19 psi

550 at 15 psi

I think if I had 9:1 Cr pistons my torque would've been a lot higher

I'm using JE 8:3:1 CR pistons and Tomei 264 cams.

EC990DBB-75E3-4453-89C1-EC9B0C5E4339_zps

Edited by silvianc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...