Jump to content
SAU Community

Recommended Posts

Hey guys.

Just an EOI here... looking at selling my 1999 R34 25GTT Skyline.

As title says, black in colour, turbo - manual.

155xxx kms

Dished Lenso D1R rims 245/45/R17

Aftermarket 3" full exhaust

Stainless Steel Split dump/front pipe

Hi Flo Cat

Cooling Pro Return Flow Front Mount

BC Racing Coilovers

Pioneer double din head unit

Side and Front clear Nismo indicators

This car has Rego until September 2015!

As you can see, just your 'stage 1' mods. I bought the car stock by an importer about 3 years ago now.

Does have some scuffs on the rims and your general wear and tear.

Have purchased a family car and sadly its time to part ways with her.

At work at the moment so cant upload any pictures at this time, but will do so tonight once i get home!

Located 5 min from Melbourne Airport

Asking price $12,000 ono

Please dont hesitate to contact me 0433 268 869

Thanks

Link to comment
https://www.sau.com.au/forums/topic/452412-r34-25gtt-black/
Share on other sites

Hey mate. Will get these pics up as soon as i can... def not the best selling point when an ad doesnt have any pictures ahaha

Ive got it booked in for a cut and polish detail on Saturday so i might wait til then to post pictures, do the car a bit of justice!

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/452412-r34-25gtt-black/#findComment-7456722
Share on other sites

  • 2 weeks later...

Hey guys. Sorry about the delay with the pictures.

I also forgot to note that this car also comes serviced and with a new battery.

Cut and polish has just been done aswell!

Custom number plates will not be sold with the car, and will be changed at change over.

Any questions please dont hesitate to contact me.

Cheers

0433 268 869

j8moa1.jpg

2jac0i.jpg

2195bpe.jpg

15owiac.jpg

65bqdk.jpg

30j5ij5.jpg

Edited by marco.pizzo
Link to comment
https://www.sau.com.au/forums/topic/452412-r34-25gtt-black/#findComment-7462860
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...