Jump to content
SAU Community

Recommended Posts

Usually around $5500. I'm not aware of any S.A. places yet, but def 1 in Sydney (Mobility Engineering) and one in Melbourne (Cross-over Car conversions) - I think there is one in Qld coming up soon, Shogun???

also the DOTARS sites has a search function to find RAW's for certain vehicles, just do a R34 search.

cheers

Compliancing is anywhere from $4500 to about $7-8000 (if plates are running short).

Basically the compliancer's job is to ensure that a car is at stock condition, which involves 'destroying' all non standard parts that are shipped with the car, as well as satisfying requirements for the ADRS, which may include fitting an unleaded fuel restrictor, new DOT approved tyres, adding a dimmer switch, etc). Oh, and they stick on a shiny purple VIN plate that certifies your car as an import.

Search for compliancing and you'll find more info about the requirements.

http://raws.dotars.gov.au/rawswebpublic/RAWPubMain.asp is the link to the DOTARS site where you can search for a workshop that can currently comply 34s..

Cheers peeps.

I think i'll just import the car then maybe through Prestigue motorsports, and then get the compliancing done by myself. As in organise it to be done in Adelaide. Or can anyone recommend an importer to go through in Adealaide?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...