Jump to content
SAU Community

Recommended Posts

No I am thinking this maybe a silly question as there are so many components in the front but mine has developed a squeak at times.

Seems to be when it has been sitting for awhile as when you start to drive it after awhile it comes right.

I think it is the front rose joint or a dry bush.

Any other things it could be?

Using Tien adjustables - they are the older style about 3 years old. They have been checked recently and are not leaking (but that could have changed).

Link to comment
https://www.sau.com.au/forums/topic/452701-front-right-suspension-squeak/
Share on other sites

Rose joint on the top hat or worn suspension bushes. I know r33/34 upper control arm inner bushes often wear out causing that noise, not sure about r32s but apparently r32 upper control arm bushes are even weaker

Edited by chiksluvit

Yuh, silly question. A dozen alternatives in there. Front end of caster rod, upper arm inner or outer bushes, especially if non-standard. Maybe the upper bearing in the upright. Balljoints and lower inner bushes are less likely to squeak, but I suppose they could, depending on their state of health.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...