Jump to content
SAU Community

Recommended Posts

up for sale is my godzilla immaculate condition inside out very rare to find in this condition have spent around 10k on just bolt on mods also the car got a full respray 5 months ago body is very straight big money spent on this gtr..has 127,000 kms Never been in any type of accident all gaps,panels are all factory.. No rust or dents, paint job still looks fresh always covered in the garage..

Major service done not long ago includes water pump timing belt kit engine mounts and a few other bits..Pushing a safe 305kw at the wheels recently tuned by unique automotive.. Can easily push 350kw+

Factory Front and rear strut brace

Factory Nismo cluster

N1 headlights

Hks gtrs turbos rebuilt 2 weeks ago with receipts

Trust down pipes

Catch can

Rc racing injectors

Apexi Power fc

Greddy profec B Spec 2 boost controller

Garret boost gauge

Rda slotted rotors front and rear

Rare kakimoto titanium exhaust this will Only be included for the right price otherwise it will come with apexi exhaust

$24500 negotiable.. 1 year rego No stupid offers need to know anything else contact me on 0434496255 post-127910-14230334451178_thumb.jpgpost-127910-14230334582498_thumb.jpgpost-127910-1423033469219_thumb.jpgpost-127910-14230334787374_thumb.jpgpost-127910-14230334957537_thumb.jpgpost-127910-14230335067483_thumb.jpgpost-127910-14230335217239_thumb.jpgpost-127910-14230335320312_thumb.jpgpost-127910-14230335439994_thumb.jpgpost-127910-14230335557182_thumb.jpgpost-127910-142303356525_thumb.jpgpost-127910-14230335732726_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/453489-immaculate-r32-gtr/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Hey guys cylinder #5 lost compression a few days ago the car is still forsale for the right price, I'm not letting this go for dirt cheap the car is immaculate and if you have a built motor this is perfect for you, for more details text or call me on 0434496255 also if It doesn't anytime soon I'll be building the motor

Hey guys cylinder #5 lost compression a few days ago the car is still forsale for the right price, I'm not letting this go for dirt cheap the car is immaculate and if you have a built motor this is perfect for you, for more details text or call me on 0434496255 also if It doesn't anytime soon I'll be building the motor

so what's the price for the car now?
  • 2 weeks later...

Hey guys cylinder #5 lost compression a few days ago the car is still forsale for the right price, I'm not letting this go for dirt cheap the car is immaculate and if you have a built motor this is perfect for you, for more details text or call me on 0434496255 also if It doesn't anytime soon I'll be building the motor

Lost how much compression, as in all? Or just from 160 down to 140?

Or has it contracted the dreaded and heavily contagious Holeinpistonitis?

If so what sort of dollars are you looking for considering it needs a new motor?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...