Jump to content
SAU Community

Recommended Posts

HDi fits behind the bumper REO, the Greddy cores do not.

You do need to buy an aftermarket A/C fan for the HDi, but that's only $40 tops.

Proven to around 300rwkw; how much more are you planning to make?

  • Like 1

Cheers Dale not having to cut the Reo bar is a what has swayed me to go with the HDI along with the price and delivery turn around.

No sure on the power I'm looking to make just yet but wouldn't be more that 300kw so that is perfect. Thanks a bunch mate. :)

  • Like 1

I've fitted a couple of HDi kits; they always go together nicely, with no cutting around vents/driving lights or radiator support; which is a plus IMO.

Also the best on price.

  • Like 2

Fantastic cheers for the steer in the right direction mate. Supercheapo sell slim thermo fans so I'll pic one up there when the HDI arrives literally just purchased it if eBay should be here but the end of month fingers crossed. Can't wait to drop that in then sort out shift kit and finally move onto a highflier and an emanage 750cc injectors and a tune. Who our best option in Sydney for tuning on emanage Dale?

Not sure if you already oredered it but i got mine for a bit cheaper than listed, there is make an offer option and i got mine for 530AUD, it was listed for 580. And this is the fan i got for it

http://www.ebay.com.au/itm/171540637640?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

  • Like 1

Not sure if you already oredered it but i got mine for a bit cheaper than listed, there is make an offer option and i got mine for 530AUD, it was listed for 580. And this is the fan i got for it

http://www.ebay.com.au/itm/171540637640?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

yeah already ordered it mate but thanks heaps. Ordered that exact fan to! Just wondering if duel fans would fit and help keep the temps down?

yeah already ordered it mate but thanks heaps. Ordered that exact fan to! Just wondering if duel fans would fit and help keep the temps down?

The fan is for the air con condenser, I don't think putting 2 would make any real difference

Yeah just been looking at some 350z setups running duel thermo fans. So no real benefit is there mate. There is a mishimoto kit but would want to spend that kind of money for two fans there are others on eBay. Just curious

Yeah just been looking at some 350z setups running duel thermo fans. So no real benefit is there mate. There is a mishimoto kit but would want to spend that kind of money for two fans there are others on eBay. Just curious

If you are talking thermos to replace the clutch fan don't waste your money. Plenty of guys have spent plenty of money trying to make it work and failed to cool anywhere near as good as the clutch fan.

  • Like 1
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...