Jump to content
SAU Community

Recommended Posts

sometimes, well most of the time i have it flat stick or slight throttle it bounces off the limiter and bogs down, missfires and slowly looses revs and power, its like what happens when your spark plug gap is ****ed...it was doing it with a gap of .8 then i went to a .7 but still does it. if i back off and back on the throttle it will sometimes get better but once it hits the limiter again itll bog down, missfire and loose revs even with foot flat or slightly, its like as if its surging out. this is mainly halfway through a slide (off street). all i want it to do is bounce off the limiter cleanly for peace at mind.

whats a solution? should i close or open gap more or is it something else? timing perhaps? i got no idea

cheers.

Link to comment
https://www.sau.com.au/forums/topic/45365-rb25det-off-limiter-bogging/
Share on other sites

The R34 will happily bounce off the rev limiter all day.

It used to be a slow pop pop pop as it hit limiter and then dropped spark then picked up again, but now with the light flywheel, its like a machine gun!

Nice.

Could be coils if it starts happening before you get to the limiter - mine starts misfiring at around 4500, and I don't usually see more than that because it feels terrible.

I understand that the car isn't running properly, but why do you want it to bounce off the limiter? If you're accelerating, hitting the limiter is costing you time, if you're doing a burnout, backing off the throttle a fraction should make bugger-all difference to smoke output, and if you're trying to drift, hitting the limiter generally means that you either have no throttle control or you're doing it wrong.

Learn throttle control - your car will thank you for it, and you'll be a better, quicker driver.

its not that i bounce it off the limiter often, its just the satisfaction that it will run cleanly if need be. all these people are sayin learn throttle control, learn throttle control, when clearly its not about that, i must explain a little better, as SOON as it hit the limiter, no bouncing off it, even without WOT, it still does it, sometimes doesnt even need to hit limiter, it just goes BRRRRR, looses revs and power and sometimes backfires hard. always when its under load.

sorry to confuse the subject but yea im not one of these 'lets just flatten it around a corner' style drivers.

  • 9 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...