Jump to content
SAU Community

Recommended Posts

Hey guys il be changing gearbox fluid soon. Il be using Castrol transmax Z in the Transfer case. I know this topic has been covered many times before. But i wanted to ask the R34 gtr owners (Getrag owners) what their thoughts and experiences are with both Castrol transmax z and Royal purple synchromax in the gearbox? Any differences between shifting smoothness etc.

I know how pricey and rare the Getrag's can be so call me fussy when i say id rather break 100 Rb26 motors than a Getrag gearbox :P haha

Edited by Levy

You can buy brand new Getrag/transfer case etc from nengun for $8.7k USD.

Try getting a brand new Rb26dett for that price.

In saying that use the fluid that Nissan recommends which is NISMO COMPETITION OIL type 2189E(75W140) 2L

Edited by Stixbnr32

You can buy brand new Getrag/transfer case etc from nengun for $8.7k USD.

Try getting a brand new Rb26dett for that price.

In saying that use the fluid that Nissan recommends which is NISMO COMPETITION OIL type 2189E(75W140) 2L

Good to know they still sell brand new. This is the first time i heard the Nismo oil. Il have to look into that. Thanks man

I use RP syncromax in mine, DO NOT UNDER ANY CIRCUMSTANCE use a gearbox additive in a Getrag

Try buying the Nismo oil and see how much it is :(

Would you recommend the RP synchromax? How many kms have you done with it?

I little over 10k and 5k of that is with 450+awkw including two trips to the drags, a day at SMSP-S and two hill climbs so far with two more at the end of this month

The RP Syncromax was designed for use in the Getrag, the Supra version which is nearly identical to the R34 one

I little over 10k and 5k of that is with 450+awkw including two trips to the drags, a day at SMSP-S and two hill climbs so far with two more at the end of this month

The RP Syncromax was designed for use in the Getrag, the Supra version which is nearly identical to the R34 one

Thanks for info. I think il give it the RP synchromax a go. Iv been using their engine oils for all my RBs without any problems. I guess there Gearbox oils should be just as good.

Used that RP stuff and made the box shit house to drive, before that it had the old oil it in from Japan and copped a hammering with 750hp.
Tried to be good to it and put the "good" oil in it and it was worse to drive.

Used that RP stuff and made the box shit house to drive, before that it had the old oil it in from Japan and copped a hammering with 750hp.

Tried to be good to it and put the "good" oil in it and it was worse to drive.

Way to kill my confidence i just bought 2 bottles today :unsure:

Il only be using it for the gearbox. Il be using Castrol transmax Z for the transfer case.

Sorry mate lol

See how you go I guess, we ended up getting the box rebuilt and synchros were rooted but gears were immaculate.

Well im not running no where near that sort of power lol Cars still standard. So what oil did you switch back to?

I have no issues with drivability with mine, it shifts perfectly fine

I use the RP stuff because when working the the BSM GTR team they had a group of oils tested after blowing a few boxes and the RP came back the best and they stopped losing boxes after changing to RP, though that was Gearmax in a PPG dog box

Post up how you go with the RP when you do it

If you want ideas on different oils look at the Supra sites, they have had the Getrag box a lot longer then us :thumbsup:

  • 3 weeks later...

Sorry about the late update guys. Finally ended up changing the the gearbox fluids. Already i noticed a big change in smoothness even while the gearbox is cold. Once its warmed up it just gets better. Before doing the change my gearbox felt pretty rough (no crunches). Especially at low speed shifts. Now it slips in beautifully :)

Like i said i ended up using Transmax z in the Transfer case and RP synchromax in the gearbox. Will see how long this smoothness last...

Edited by Levy
  • Like 1

That's good to hear :thumbsup:

I just did two days off hill climbs at bathurst :), and had a issue on the first run on the second day while box was still cold, it crunched going from 4th back to 3rd coming into the Cutting, after that the box had warmed up and was perfect

I was talking to the Supra owner that was there about oil and he too runs RP without issue but mentioned the Getrag was designed for Dextron II which is a mineral oil, not synthetic , but you can't buy that anymore as it was superseded by Dextron III

  • Like 1

If you follow the tread on the same subject further down you will se that Getrag say to use the Dextron II because the seals do not like modern synthetics

Poster there is buying Toyota T IV which presumably fits the bill.

  • 1 year later...

Just a quick update i havnt changed the the gearbox and tranfer oils since and have done roughly 10k. Its been through alot of hard street driving and occasional drags. And in the last 6 months iv been doing a fair bit of 2 step launches with the car making 340awkw. Gearbox hasnt had any issues since and still feels smooth at high and low rpms. Il be servicing soon and will be using the same oils

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...