Jump to content
SAU Community

Replacing Redline Shockproof

Corktrain

By Corktrain,
in Drivetrain and transmission

 Share

Recommended Posts

Corktrain Enthusiast

Corktrain

Posted
Posted

G'Day all

Been having problems lately with the old smurfs blood pumping itself onto the garage floor through the gearbox breathers after every drive. It's giving me the shits and I would like to change it over to Royal Purple as soon as possible.

Does anyone know if there are any snag points when it comes to getting rid of the Redline oil? I've heard stories about it being quite stubborn to flush out.

The plan is to buy some cheap stuff, run it for 50-100kms, then drop it and put the RP in. Any tips would be appreciated..

Cheers

Link to comment
Share on other sites
89CAL Grand Master

89CAL

Posted
Posted

If you want to flush then ATF might work pretty well. I ran it to see how it would go after seeing late model commodores run it in their manual boxes. It worked OK but because it thins out nicely when it warms up, it flushed the gearbox pretty well.

Its just a suggestion anyway. Im having the same problem with the redline but have a new batch ready to go in. If it does the same then ill play with the breather

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Never ending fuel pump drama

      By Murray_Calavera · Posted

      So last night pulling away from the lights, I lost power for about 1 second. Bit weird, but I kept driving... 5 minutes later the pump completely dies. When I tried to start the car, the pump won't even prime.  I left the car for about an hour, tried to start it and it all appeared fine. Pump primed, car started, got the fuel pressure I should have.... Start driving home, 5 minutes later it dies again. I'm stuck in a shit spot this time going up hill with a car right behind me, so I just let the car continue to turn over while praying to the fuel pump gods. After about 2 minutes of turning the engine over, the fuel pump came back to life and I got home (only about another 5 min away).  So I've been digging around online, it seems like the 525 fuel pumps really don't like to be run at 100% all the time. I've found quite a few examples online of people killing their Walbro 525 pumps within about a year of usage when they are run without PWM.  So, my pump is an Aeroflow 525 (AF49-1057) and I've been running it at 100% without PWM. I'm thinking the Aeroflow 525 didn't like being run at 100% and has burnt itself up.  I really am sick of dealing with fuel pump issues, my current thoughts are -  1. Use a Walbro 450 and run it without PWM. It seems like these pumps hold up pretty well to being run at 100% all the time. I only make about 350kw and can't see me making any more power any time soon so this is probably a fine option.  2. Get a Walbro 525, run it with PWM. I know doing this will annoy me as I feel like with only 350kw, its extra expense that I don't "need" and I'll be thinking the whole time while setting it up that I should have gone with option 1. I know I'll be happy with this option when its setup and running, its only the initial setup frustration and cost as an issue.  3. Get a Walbro BKS1001 brushless pump. This is the fu*k it I'm already going PWM, might as well go full retard. This option just seems better in every way, with the only downside being cost. But I don't know much about this pump so I could be wrong.  Happy to get everyone's thoughts before I go digging around in the fuel tank again. 
    • kevboost7
      Can someone tell me what this part is for? Someone duct taped it.

      By kevboost7 · Posted

      Doing it this weekend. For sure this time. Thank you forum gods.  And im running map sensor now with the haltech. Still have the AFMs attached to the mushroom dome shaped air filter things
    • GTSBoy
      Like loud exhausts? You could be a psychopath.

      By GTSBoy · Posted

      Actually, it is probably pretty legit. I mean, it's still woke feminazi bullshit academia, but you would have to agree that it is very likely that there would be a correlation between wanting a loud exhaust and scoring at the unpleasant end of the scales for dark triad personality traits. The fact that they found it didn't correlate with narcissism and only with psychopathy and sadism definitely shows that the loud exhaust thing is more of a "f**k you" than a "look at me", and I reckon that rings pretty close to most of the dickheads who take it to the extreme. Remember, this is correlation with tendency to be closer to one end of a personality trait scale than the other end. Of course someone who is at the literal opposite end of the psychopathy scale is going to be so considerate of others that they wouldn't even think about wanting to upset anyone with a loud exhaust. So the finding isn't that "you are a psychopath". Just that you score more towards that end of the scale than someone who doesn't like loud exhausts (on average, not necessarily even for specific individuals).
    • WMDC35
      Gran Turismo 7 Time trial

      By WMDC35 · Posted

      Blitz ER34 at some point hopefully, should be allowed in Gr3 if they do.
    • MBS206
      Blue Smoke from exhaust, RB25DE+T

      By MBS206 · Posted

      Stock R33 boost control, with the exhaust, and FMIC done, will boost creep. There is no tuning around it if it is the factory boost solenoid.   If it has an aftermarket electronic boost controller, the settings/mapping can be altered in it.   Oil could be anything as mentioned, however did it ever do it before you did the turbo swap? How much and how often did you drive the car before the swap?   I'm hinging on too much oil supply, or it's not draining properly.   To check, pull the air outlet off the turbo. Is it full of oil? Drop the exhaust at the turbo, does it appears to be oiled/coked? Now pull turbo and check the exhaust manifold, does it appears oiled and coked the same way?   Secondly, the PCV could even be stuffed / not functioning properly and will cause blowing of blue smoke.
×
×
  • Create New...