Jump to content
SAU Community

Recommended Posts

Hey guys I want to relocate my aircon controller into my glove box to make room for a double din head unit. I've read somewhere you can get a loom extension to make it reach the glovebox but I haven't managed to find where they are sold. Can anyone help me out? Much appreciated

Link to comment
https://www.sau.com.au/forums/topic/453793-r32-gtr-aircon-control-relocation/
Share on other sites

does the single din flip up fit in the top slot?
would make sense to have it higher up and not blocking the other slots?

Also, WHERE DID YOU GET THAT CUP HOLDER O_O

Edited by GH05T

Spoke to a friend about these a while back and I didn't follow-up.

He does this type of work for a living. I'll follow-up and see what we can do.

Kat had one in her car and put me on to RHD (not cheap for what it is).

Spoke to a friend about these a while back and I didn't follow-up.

He does this type of work for a living. I'll follow-up and see what we can do.

Kat had one in her car and put me on to RHD (not cheap for what it is).

the one on RHDJapan made by Superior Auto Creative doesn't really appeal to me. Too chrome/bling compared to their other stuff. That one pictured looks to have been painted?

they are everywhere on yahoo auction japan (the extensions), not sure of the maker but the usually run 5000 yen. Also I just bought a glove box insert that has mounting points for the radio and econ unit, Ill post some pictures and see if I can find a makers mark or something for that as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...