Jump to content
SAU Community

Recommended Posts

found fuses all ok . also check eng light has come on have tried reset but light stays solid no flashs hep to reset it screen still not working so not to worry will look at other ways to fix at a later time.

So does this car have a warranty or was it a private seller?

I'd be pretty worried if that was my car I just payed for with random issues.

Edited by Ben C34

Check if I had a brake signal mod done to it could explain the cel. Is it running rough in anyway. Check your air bag plugs under the car seat are plugged in properly for the srs light to

Who would of thought that. If your still having problems with screen it could be the ribbon in the back of it thats broken from going up and down.

You will have to remove dash to get to it. Check there is power at the plug going into the back of tv first. Then there is a flexible ribbon out of that which goes in the back of the screen.

Do any of the buttons beep when you press them? Sometimes the TV can be left in the VTR/AUX which will leave the screen black if nothing is plugged into it.

It might only be there if the tv button was pressed. Do your buttons beep when you press them. If you press the buttons and nothing happens then its not getting power. What happens if you press the eject button on dvd rom?

You will help me work it out if you answer those questions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...