Jump to content
SAU Community

Recommended Posts

Wanting to swap my genuine BRIDE Ergo II's for R33 GT-R seats + cash my way.

OR R34 seats as long as the rails fit a 33. Can anyone confirm?

These are genuine seats and they come with universal Just Jap rails. The rails need some modding to be perfect but they're solid enough to drive around with.

Only interested in people fairly close by. Brisbane, goldcoast, etc. Not interested in posting.

Located in Brisbane. Price is a pair of great condition 33 GTR seats (no tears, cigarette burns, stains) + $500 my way.

Please only reply if you're local. I don't want to be freighting seats.

0401029817

F017EB0F-A734-4287-81C8-9A165B6076FC_zps

1D2E532E-8356-4B4C-96ED-FBA98677A47F_zps

0FFF4160-988C-411B-8F42-D304CE15FDA3_zps

12536DE9-6677-4064-BE57-5D031D621968_zps

I'm not willing to do anything with someone interstate unless whoever is swapping with me pays for freight both ways and sends their seats first. I need seats in my car as sometimes I have to drive it if the mrs takes my daily.

I would probably straight swap 34 GT-R seats, but I don't know what they're worth in comparison to these. Everything is negotiable.

0401029817 - please text as sometimes I don't see these replies and I'd rather discuss things privately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...