Jump to content
SAU Community

Recommended Posts

Os giken triple plate 1000km old from otomoto suits r33 gtst may fit r32/33 gtr removed from car as im going auto $2200

Arp rb flywheel bolt $60

Will fit r32 gtr-gtst and r33 gtr-gtst

R33 clutch master cylinder $130

1yr old from kudos will fit r33 gts4 gtst

R32 clutch peddle reinforced welds

R32 stock on brakes with heavy duty clutch $50

Over sized slave cylinder from repco same a nismo one with out the $$$$$ price will fit rb25 r33 gearbox $24 1000km old

Gktech clutch line $35 will fit r32-33

Gktech clutch fork pivot $10

Will fit r32 gtr push type clutch

Z32 300zx r33 rb25 box $10

Also have a tailshaft and cross member for are r32 gtst to rb25 gearbox great convertion for a stronger gearbox tailshaft made by ardc drivetrain $900 for tailshaft and cross member / yes its strong handled 600hp

( gearbox is blown you can take it for free strip 3rd gear )

(Dog not for sale)

Nsw

Penrith area

Pm for questions! Or message/call 0422720640 il message back if i dont answer

World Peace

post-88690-14243017317759_thumb.jpg

post-88690-14243017468817_thumb.jpg

post-88690-14243017706596_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/454010-r3233-parts-os-giken/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...