Jump to content
SAU Community

Recommended Posts

Hey all! I have been thinking of upgrading the suspension in my R33 for a while now and I think the time has come.

A good deal has come up on a used set of BC BR coilovers for $800 the owner said they would probably have about 10,000k's on them and they have been used in his street car..

I was just wondering if I could get some opinions on buying second hand before I think about dropping the cash on them or if I should just buy brand new.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/454678-buying-second-hand-coilovers/
Share on other sites

I'd want to remove/inspect the upper spring retainer/top hat. Check for play in pillow ball.

Next remove springs and check damper for scoring or pitting on damper rod. Also check dust seals (you won't be able to see oil control seals). Any dampness = bad.

Compress the damper and check for squelching or bubbling sounds. Also check lateral free-play of damper rod. Ensure damper rebounds to full length without assistance.

Check all adjusters through their range of motion.

For $800 I'd be so much more inclined to shell out an extraa $400 and get new ones.

I simply said that for 800 bucks I wouldn't be buying second band BC.

When I bought mine I went through Aaron at import monster and he imported a great set of RA teins for me

I got these for 600 delivered from Japan. Like new

post-47556-0-26727600-1426558151_thumb.jpg

I just sold a set of used Cusco coilovers for $200. One was known to be leaking, rest felt ok on the car (note my ad clearly stated that they needed a rebuild). That's realistically all second hand coilovers are worth unless you know the history of them.

I might pay $800 for a set of MCA gold second hand (even though they'd be thrashed to death on a rally car) because they can be completely rebuilt, and they are top notch gear to start with.

If you can get coilovers new for $1100, then second hand ones are not worth anywhere near 50% of that price, unless as I stated you can prove their history and condition.

A few years ago I bought some second have JDM spec "Ohlins" PCV coilovers for a little over $1000 shipped from Malaysia. Worked great for a while, until the pillow balls started knocking. I would have had them rebuilt but my Skyline (un)fortunately was written off by a flood before I had the chance

If I had to do it again, I'd spend the money on brand new MCAs or a just a Eibach/Bilstien combo... Something that I know for sure can be rebuilt. Heasmans told me that some JDM Ohlins can't be rebuilt, which is a shame for a set of coilovers that go for around $3000 plus shipping brand new!

Thanks for the feedback everyone! I will wait a bit longer, save some more coin and buy them brand new which will give me piece of mind knowing that I might not be buying someone else's problem and that they will have warranty :yes:

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...