Jump to content
SAU Community

Buying Second Hand Coilovers

Brady_033
 Share

Recommended Posts

Brady_033 Apprentice

Brady_033

Posted
Posted

Hey all! I have been thinking of upgrading the suspension in my R33 for a while now and I think the time has come.

A good deal has come up on a used set of BC BR coilovers for $800 the owner said they would probably have about 10,000k's on them and they have been used in his street car..

I was just wondering if I could get some opinions on buying second hand before I think about dropping the cash on them or if I should just buy brand new.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/454678-buying-second-hand-coilovers/
Share on other sites
colourclassic Mentor

colourclassic

Posted
Posted

I'd want to remove/inspect the upper spring retainer/top hat. Check for play in pillow ball.

Next remove springs and check damper for scoring or pitting on damper rod. Also check dust seals (you won't be able to see oil control seals). Any dampness = bad.

Compress the damper and check for squelching or bubbling sounds. Also check lateral free-play of damper rod. Ensure damper rebounds to full length without assistance.

Check all adjusters through their range of motion.

For $800 I'd be so much more inclined to shell out an extraa $400 and get new ones.

GTR_JOEY Grand Master

GTR_JOEY

Posted
Posted

I simply said that for 800 bucks I wouldn't be buying second band BC.

When I bought mine I went through Aaron at import monster and he imported a great set of RA teins for me

I got these for 600 delivered from Japan. Like new

post-47556-0-26727600-1426558151_thumb.jpg

warps Mentor

warps

Posted
Posted

I just sold a set of used Cusco coilovers for $200. One was known to be leaking, rest felt ok on the car (note my ad clearly stated that they needed a rebuild). That's realistically all second hand coilovers are worth unless you know the history of them.

I might pay $800 for a set of MCA gold second hand (even though they'd be thrashed to death on a rally car) because they can be completely rebuilt, and they are top notch gear to start with.

If you can get coilovers new for $1100, then second hand ones are not worth anywhere near 50% of that price, unless as I stated you can prove their history and condition.

Cassbo Grand Master

Cassbo

Posted
Posted

A few years ago I bought some second have JDM spec "Ohlins" PCV coilovers for a little over $1000 shipped from Malaysia. Worked great for a while, until the pillow balls started knocking. I would have had them rebuilt but my Skyline (un)fortunately was written off by a flood before I had the chance

If I had to do it again, I'd spend the money on brand new MCAs or a just a Eibach/Bilstien combo... Something that I know for sure can be rebuilt. Heasmans told me that some JDM Ohlins can't be rebuilt, which is a shame for a set of coilovers that go for around $3000 plus shipping brand new!

Brady_033 Apprentice

Brady_033

Posted
  • Author
Posted

Thanks for the feedback everyone! I will wait a bit longer, save some more coin and buy them brand new which will give me piece of mind knowing that I might not be buying someone else's problem and that they will have warranty :yes:

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...