Jump to content
SAU Community

Recommended Posts

Hey guys!

when i bought my r32 gtst with rb25de it never had a charcoal canister, the vent line was simply capped off and i also noticed when you unscrew the fuel cap it never whiffed out air like its meant to and i always had a pretty strong fuel fume smell while driving no matter what windows up/windows down didn't seem to matter.. after a while i thought i would plumb it back in, bought the canister hooked it up correctly and tested it out over the next few weeks, the smell seemed to have gone but then when the windows where down it was stronger then ever...

about a year ago i replaced the fuel pump with a walbro and replaced the fuel lines from the tank to the hard lines and when i got the car i replaced from the hard lines to the filter and then to the rail.. but it still smelt


so i did some more research and found that they have a common leak area with in the compliance fuel restrictor, i pulled that out and found that the sealant they had used had perished, i re-sealed it with sickaflex and it still smelt..

so now bassicly I'm after advice on what steps to take next.. a lot of people have said to replace the o ring above the fuel pump but I'm almost certain that is sealed correctly as you can't smell anything in the boot...

the only thing i can think of it being is the filler neck itself or the vent lines from the tank... I'm pretty much at the stage that i want to drop the tank and replace everything... if anyone has any advice or ideas please let me know and thank you in advance!



post-120683-0-94272800-1426413525_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/454775-fuel-smell-while-driving/
Share on other sites

Leaky injectors ?

Does it have the PCV connected and works

Does it have a catch can and is that vented to the atmosphere

Is it just running rich. What is the AFR's

Do you smell it when its

- Idling

- Moving

- when it is off (then it's a leak)

I had the same issue with my r33 Gtst. I ended up prying out the fuel neck compliance thingy, cleaning it up and using sikaflex to create a nice new seal for it and refitting it. Now the fuel smell is gone and when I go to fill up at the servo you can hear the pssssshhh sound which would never happen before.

If that doesn't fix it then just replace the fuel pump o ring as its a cheap fix (might need replacing after you changed your fuel pump) this was the cause for my in cabin fuel smell when I had my S15.

What hose did you use when you replaced the lines? Some hoses are just prone to be stinky.

Charcoal canister hooked up correctly? When you say the vent line was capped off do you mean the vent for the fuel tank was closed/blocked off?

I'd replace the fuel pump o-ring, cheap, easy and quick to do, leave the guesswork out of it.

picking up a new oring tomorrow, ill fit it and see how i go,

yep cannister hooked up correctly as far as i can see, i compared it to a mates on
and yes the vent line coming from the tank had a bit of hose coming off with a screw in it hose clamped on


i put the car in the air last night, turned it on and got under couldn't smell or see anything...doesnt gel

I had the same issue with my r33 Gtst. I ended up prying out the fuel neck compliance thingy, cleaning it up and using sikaflex to create a nice new seal for it and refitting it. Now the fuel smell is gone and when I go to fill up at the servo you can hear the pssssshhh sound which would never happen before.

If that doesn't fix it then just replace the fuel pump o ring as its a cheap fix (might need replacing after you changed your fuel pump) this was the cause for my in cabin fuel smell when I had my S15.

most likely this.

heard of this plenty of times and usually is the filler neck leaking. Was the same on mine. I found this gives a really strong smell into the cabin as its so close to ur door.

Move your car out into the sun for a while and then when it is nice n warm go and sit in the drivers seat and look back thru ur wing mirror past the petrol filler port. you will probably see fumes coming out- I could before I fixed my filler neck.

If this doesn't fix it then look into where the lines are going to that used to be connected to the charcoal canister.

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...